アステックペイント

マックスシールド1500Si-JY

Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.

Basic Information

Manufacturerアステックペイント
Use / Type
Use: Exterior Wall | Resin: Silicone
Original (JA): 弱溶剤形二液外壁用シリコン系上塗材(シリコン樹脂・2液)
Water-based / Solvent-basedSolvent-based, 2-component (mild solvent-based)
1K / 2K2-component (2K)

Application Specifications

Dilution0–1.5 L/15 kg set (kit)
Thinner / DiluentアステックシンナーDX(thinning)
Number of Coats2 coat(s)
Coverage (consumption)0.24–0.28 kg/m²
Recoat Time (drying interval)
25°C: 3 hours or more
Mixing RatioBase (Comp. A) 9:Hardener (Comp. B) 1
Pot Life5 hours or less (23°C)
Field Notes (JA)・ 用途=外壁(窯業系サイディング・モルタル・ALC・コンクリート・金属サイディング・波形スレート・付帯部・各種旧塗膜)
・ 荷姿15kgセット(A液13.5kg/B液1.5kg)・3kgセット(A液2.7kg/B液0.3kg)、硬化剤は通常/弾性硬化剤より選択(木部は弾性硬化剤使用)
・ 配合比A:B=9:1(A液13.5kg:B液1.5kg)
・ 艶有・3分艶/68色
・ 可使時間5時間以内(23℃)
・ 下塗=窯業系はエピテックフィラーAEⅡ等(下地により選定)
・ 最終養生24時間以上(25℃)
・ 低汚染性・防カビ・防藻性
・ 期待耐用年数13〜16年
・ ⚠️溶剤系のため火災・中毒に注意、5℃以下・湿度85%以上での施工は避ける
・ シーリング材の目地に塗装すると、動きに追従できず塗膜がひび割れることがある。トタン板の継ぎ目・折り曲げ部は塗膜が薄くなりやすいので、先に拾い塗りをする。ウールローラーでは塗回数が増え、エアレスは塗装ロスが大きくなるため塗布量は上限値を目安にする。

⚠️ Cautions & Notes (Japanese original)

To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.

⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
🔍 Search other paints (Japanese)
Data source: official catalogs / technical data sheets (TDS) of アステックペイント