アステックペイント

1液マックスシールドネオSi-JY

Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.

Basic Information

Manufacturerアステックペイント
Use / Type
Use: Trim (Eaves / Fascia) | Resin: Silicone
Original (JA): 弱溶剤形一液付帯部用シリコン系上塗材(シリコン樹脂・1液)
Water-based / Solvent-basedSolvent-based, 1-component (mild solvent-based)
1K / 2K1-component (1K)

Application Specifications

Dilution
Brush / Roller: 0–10%
airless: 5–10%
Thinner / DiluentアステックシンナーDX(thinning)
Number of Coats2 coat(s)
Coverage (consumption)0.24–0.36 kg/m²
Recoat Time (drying interval)
25°C: 3 hours or more, 3 days or less
Field Notes (JA)・ 用途=付帯部(鉄部・硬質塩ビ・木部・フレキ板等)専用上塗材
・ 荷姿15kg・4kg
・ 艶有・3分艶/69色
・ 下塗=付帯部(鉄部)は一液エクセルエポプライマーJY、雨樋(硬質塩ビ)はシーラーレス、金属面は錆止め等の下塗材が必要(雨樋以外は各種適用下塗材が必要)
・ 最終養生24時間以上(25℃)
・ 低汚染性
・ 期待耐用年数13〜16年相当経過後も光沢保持率80%以上
・ ⚠️溶剤系のため火災・中毒に注意、5℃以下・湿度85%以上での施工は避ける
・ 工程内(3時間以上3日以内)を超えて塗り重ねたり、1回で厚塗りすると前工程の塗膜が縮れることがある。トタン板の継ぎ目・折り曲げ部は塗膜が薄くなりやすいので、先に拾い塗りをする。ウールローラーでは塗回数が増え、エアレスは塗装ロスが大きくなるため塗布量は上限値を目安にする。

⚠️ Cautions & Notes (Japanese original)

To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.

⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
🔍 Search other paints (Japanese)
Data source: official catalogs / technical data sheets (TDS) of アステックペイント