イサム塗料

エポロフロアーETローラー用

Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.

Basic Information

Manufacturerイサム塗料
Use / Type
Use: Floor | Resin: Epoxy | Features: High-build
Original (JA): 無溶剤2液型エポキシ塗床材(厚膜)/屋内用
Water-based / Solvent-basedSolvent-free, 2-component (100% solids)
1K / 2K2-component (2K)

Application Specifications

DilutionUndiluted (as supplied)
Thinner / Diluent
Number of Coats
Roller (ER-1 smooth finish): 2 coat(s)
Roller · Trowel application (ER-2 paste method): 3 coat(s)
Roller (ER-3 Anti-slip (non-slip)): 2 coat(s)
Coverage (consumption)
Roller (ER-1 smooth finish): 0.6 kg/m² (Top coat 0.30×2 coat(s)のTotal)
Roller · Trowel application (ER-2 paste method): 1.6 kg/m² (Paste 1.0+Top coat 0.30×2 coat(s)のTotal. No. 7 silica sandをPasteにmixing)
Roller (ER-3 Anti-slip (non-slip)): 0.8 kg/m² (Intermediate coat 0.30+Top coat 0.50のTotal. 別にNo. 5 silica sand: broadcast (sprinkle))
Recoat Time (drying interval)
23°C: 8–24 hours (Topcoat recoating)
Mixing RatioBase (Comp. A) 5:Hardener (Comp. B) 1
Pot Life30 minutes (25°C)
Field Notes (JA)・ 工法はローラー用(本材は無希釈)。荷姿18kgセット(A液15kg・B液3kg)。標準塗り30㎡/セット(2回塗り)。ER-1工法(平滑):下塗りエポロEプライマー(A:B=1:1、エポロEシンナー0〜30%希釈、0.15〜0.20、5〜72時間)→上塗り0.30×2(8〜24時間、最終養生24時間以上)。ER-2(ペースト):ET1.0+硅砂7号0.50→上塗り0.30×2。ER-3(防滑):中塗り0.30+骨材硅砂5号1.0〜1.5+上塗り0.50(台帳の旧メモは中塗り1.0だったが、2024.04版カタログは0.30。旧メモが参照した公式PDFは現在公開されておらず照合できないため現行カタログを採用)。屋内用(屋外・紫外線当たる箇所は非推奨)。F☆☆☆☆。エポロEシンナーは下塗りプライマーの希釈・器具洗浄用(本材は無溶剤・無希釈)。
・ 硅砂の散布量: ER-2 硅砂7号 0.50kg/㎡(ペーストに混合)、ER-3 硅砂5号 1.0〜1.5kg/㎡(散布)。
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
🔍 Search other paints (Japanese)
Data source: official catalogs / technical data sheets (TDS) of イサム塗料
Page updated: 2026-09-03