関西ペイント

エポマリンプライマー

Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.

Basic Information

Manufacturer関西ペイント
Use / Type
Use: Primer / Undercoat | Resin: Epoxy
Original (JA): ポリアミド硬化エポキシ樹脂下塗塗料( 2 液形)
Water-based / Solvent-basedSolvent-based, 2-component
1K / 2K2-component (2K)

Application Specifications

Dilution0–10%
Thinner / DiluentテクトEP thinner
Number of Coats1 coat(s)
Coverage (consumption)
airless: 300 g/m²
Brush / Roller: 160 g/m²
Recoat Time (drying interval)
5°C: Min 48 hours / Max 6 months
Usable time 12 hours
10°C: Min 48 hours / Max 6 months
Usable time 12 hours
20°C: Min 16 hours / Max 3 months
Usable time 8 hours
30°C: Min 10 hours / Max 2 months
Usable time 6 hours
40°C: Min 10 hours / Max 2 months
Usable time 4 hours
Mixing RatioBase 6:Hardener (Comp. B) 1
Pot Life12 hours (5°C) , 12 hours (10°C) , 8 hours (20°C) , 6 hours (30°C) , 4 hours (40°C)
Induction time (after mixing)10–15 minutes when applied at 5–10℃ (not needed at 10℃ or above)
Field Notes (JA)・ 橋梁・電力・鉄塔用のエポキシ下塗。
・ 標準膜厚は乾燥40µm/回。
・ 5〜10℃では混合後10〜15分の熟成が必要。
・ 常時没水される箇所には使用できない。

* For heavy-duty anticorrosion work, the number of coats and the film thickness are fixed by the painting specification of each project. The figures shown here are the maker's standard values.

⚠️ Cautions & Notes (Japanese original)

To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.

⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
🔍 Search other paints (Japanese)
Data source: official catalogs / technical data sheets (TDS) of 関西ペイント
Page updated: 2026-09-03