関西ペイント

KCレタン上塗

Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.

Basic Information

Manufacturer関西ペイント
Use / Type
Resin: Urethane
Original (JA): イソシアネート硬化ポリウレタン樹脂上塗塗料( 2 液形)
Water-based / Solvent-basedSolvent-based, 2-component
1K / 2K2-component (2K)

Application Specifications

Dilution
airless: 0–10%
Brush / Roller: 0–5%
Thinner / Diluentレタンシンナー
Number of Coats1 coat(s)
Coverage (consumption)
airless: 160 g/m²
Brush / Roller: 120 g/m²
Recoat Time (drying interval)
5°C: Min 24 hours / Max 7 days
Usable time 8 hours
10°C: Min 24 hours / Max 7 days
Usable time 6 hours
20°C: Min 16 hours / Max 7 days
Usable time 5 hours
30°C: Min 10 hours / Max 7 days
Usable time 3 hours
40°C: Min 8 hours / Max 7 days
Usable time 2 hours
Mixing RatioBase 85:Hardener (Comp. B) 15
Pot Life8 hours (5°C) , 6 hours (10°C) , 5 hours (20°C) , 3 hours (30°C) , 2 hours (40°C)
Induction time (after mixing)Not required (explicitly stated in the official data sheet)
Field Notes (JA)・ 標準膜厚は下塗100µm・上塗30µm(Dry)
・ 作業禁止条件は気温0℃以下・湿度85%以上(他品より低い0℃基準)
・ 希釈用・器具洗浄用は専用シンナーを使用し、アルコール系溶剤を含有するシンナーは使用不可。

* For heavy-duty anticorrosion work, the number of coats and the film thickness are fixed by the painting specification of each project. The figures shown here are the maker's standard values.

⚠️ Cautions & Notes (Japanese original)

To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.

⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
🔍 Search other paints (Japanese)
Data source: official catalogs / technical data sheets (TDS) of 関西ペイント
Page updated: 2026-09-03