関西ペイント

カンペグラス EP

Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.

Basic Information

Manufacturer関西ペイント
Use / Type
Resin: Epoxy
Original (JA): 特殊アミンエポキシ樹脂フレーク塗料(2液形)
Water-based / Solvent-basedSolvent-based, 2-component
1K / 2K2-component (2K)

Application Specifications

Dilution0–3%
Thinner / DiluentテクトEP内面用シンナー (thinner for tank-interior use)
Number of Coats1 coat(s)
Coverage (consumption)
airless: 800 g/m²
Brush / Roller: 300 g/m²
Recoat Time (drying interval)
5°C: Min 48 hours / Max 10 days
Usable time 8 hours
10°C: Min 48 hours / Max 10 days
Usable time 8 hours
20°C: Min 16 hours / Max 7 days
Usable time 6 hours
30°C: Min 12 hours / Max 7 days
Usable time 4 hours
40°C: Min 12 hours / Max 7 days
Usable time 4 hours
Mixing RatioBase 6:Hardener (Comp. B) 1
Pot Life8 hours (5°C) , 8 hours (10°C) , 6 hours (20°C) , 4 hours (30°C) , 4 hours (40°C)
Induction time (after mixing)30 minutes
Field Notes (JA)・ ガラスフレーク厚膜塗料で標準膜厚は下塗225µm・上塗150µm(Dry)と厚い。
・ エアレスは塗料組成の影響で機器の摩耗劣化が生じやすく保守に注意。
・ 素地調整は水洗で塩分・水溶性汚染物質を除去し油・グリースも除去する。

* For heavy-duty anticorrosion work, the number of coats and the film thickness are fixed by the painting specification of each project. The figures shown here are the maker's standard values.

⚠️ Cautions & Notes (Japanese original)

To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.

⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
🔍 Search other paints (Japanese)
Data source: official catalogs / technical data sheets (TDS) of 関西ペイント
Page updated: 2026-09-03