関西ペイント
CUIサモスター
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | 関西ペイント |
|---|---|
| Use / Type | Resin: Silicone ｜ Features: Heat-resistant Original (JA): 常温硬化形シリコーン樹脂耐熱塗料 シリコーン樹脂系CUI(Corrosion Under Insulation)対策用耐熱塗料 |
| Water-based / Solvent-based | Solvent-based, 2-component |
| 1K / 2K | 2-component (2K) |
Application Specifications
| Dilution | 0–5% |
|---|---|
| Thinner / Diluent | エナメルシンナー200 |
| Number of Coats | 1 coat(s) |
| Coverage (consumption) | airless: 650 g/m² Brush / Roller: 300 g/m² |
| Recoat Time (drying interval) | 10°C: Min 24 hours / Max 7 days Usable time 10 hours 20°C: Min 6 hours / Max 7 days Usable time 12 hours 30°C: Min 6 hours / Max 7 days Usable time 8 hours 40°C: Min 6 hours / Max 7 days Usable time 5 hours |
| Mixing Ratio | Base 95:Hardener (Comp. B) 5 |
| Pot Life | 10 hours (10°C) , 12 hours (20°C) , 8 hours (30°C) , 5 hours (40°C) |
| Induction time (after mixing) | Not required (explicitly stated in the official data sheet) |
| Field Notes (JA) | ・ 標準乾燥膜厚70µm。 ・ -185℃〜540℃の耐熱性。 ・ ステンレス面へ塗装する場合は非金属研掃材でスィープブラスト処理する。 ・ 過剰な膜厚は設備稼働時に塗膜クラックが生じる危険がある。 ・ 【公式資料の注記】本ページのリンク先の公式製品説明書は、可使時間を 10℃=10時間・20℃=12時間・30℃=8時間・40℃=5時間 と記載している（2026-08-02確認・原文ママ）。ポットライフは通常、気温が高いほど短くなるため20℃だけ長いのは不自然。20℃前後の現場では12時間をあてにせず短めに見込むこと |
* For heavy-duty anticorrosion work, the number of coats and the film thickness are fixed by the painting specification of each project. The figures shown here are the maker's standard values.
⚠️ Cautions & Notes (Japanese original)
To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of 関西ペイント
Page updated: 2026-09-03