関西ペイント
SDジンク1000HA(S)
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | 関西ペイント |
|---|---|
| Use / Type | Use: Primer / Undercoat ｜ Resin: Inorganic Original (JA): 変性アルキルシリケート樹脂無機ジンクリッチプライマー( 2 液、低亜鉛濃度形) |
| Water-based / Solvent-based | Solvent-based, 2-component |
| 1K / 2K | 2-component (2K) |
Application Specifications
| Dilution | 0–20% |
|---|---|
| Thinner / Diluent | SD zinc 1000HA thinner |
| Number of Coats | 1 coat(s) |
| Coverage (consumption) | 200 g/m² |
| Recoat Time (drying interval) | 5°C: Min 24 hours / Max 6 months Usable time 24 hours 10°C: Min 24 hours / Max 6 months Usable time 24 hours 20°C: Min 24 hours / Max 6 months Usable time 24 hours 30°C: Min 24 hours / Max 6 months Usable time 24 hours 40°C: Min 24 hours / Max 6 months Usable time 24 hours |
| Mixing Ratio | Base 57.8:Liquid 42.2 |
| Pot Life | 24 hours (5°C) , 24 hours (10°C) , 24 hours (20°C) , 24 hours (30°C) , 24 hours (40°C) |
| Induction time (after mixing) | Not required (explicitly stated in the official data sheet) |
| Field Notes (JA) | ・ 変性アルキルシリケート2液低亜鉛濃度形。 ・ 素地調整はブラスト(ISO Sa2 1/2) ・ 溶断・溶接に支障が出ないよう乾燥膜厚は15〜25μmに管理。 ・ 7日以内に全膜厚50μm以上に塗り重ねるとワレの恐れ。 ・ 作業禁止条件は気温0℃以下・湿度50%以下。 |
* For heavy-duty anticorrosion work, the number of coats and the film thickness are fixed by the painting specification of each project. The figures shown here are the maker's standard values.
⚠️ Cautions & Notes (Japanese original)
To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of 関西ペイント
Page updated: 2026-09-03