菊水化学工業
水系バンノウプライマーエポ
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | 菊水化学工業 |
|---|---|
| Use / Type | Use: Primer / Undercoat Original (JA): 下塗材 |
| Water-based / Solvent-based | Water-based, 2-component |
| 1K / 2K | 2-component (2K) |
Application Specifications
| Dilution | Undiluted (as supplied) |
|---|---|
| Thinner / Diluent | Tap water |
| Number of Coats | 1–2 |
| Coverage (consumption) | 75–150 m²/15 kg (0.10–0.20 kg/m²) |
| Recoat Time (drying interval) | 23°C: between steps 6–168 hours / within the step 3–168 hours |
| Mixing Ratio | Base material 14:Hardener (Comp. B) 1 |
| Pot Life | 6 hours (23°C) |
| Field Notes (JA) | ・ spec_1764とspec_1765で下塗り値（基材14kg＋硬化剤1kg・無希釈・塗回数1～2・間隔 工程間6～168hr/工程内3～168hr・可使時間6時間・所要量75～150㎡/15kg）は完全一致。「15kg」は基材14kg＋硬化剤1kgの調合セット量。 ・ 素地は含水率10％以下・pH10以下まで乾燥させてから施工する。主材・硬化剤は混ぜ合わせ前に各々よく撹拌し、指定比率でミキサー混合する（小分け時は計量器を使用）。気温5℃以下・湿度85％以上または結露のおそれがある場合は施工を行わない。 |
⚠️ Cautions & Notes (Japanese original)
To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.
- 公式施工要領書: https://www.kikusui-chem.co.jp/download/view/pdf/spec_id/1764/
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of 菊水化学工業