菊水化学工業
ロイヤルセラクリヤー
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | 菊水化学工業 |
|---|---|
| Use / Type | Original (JA): 2液弱溶剤形セラミックハイブリッドシリコン樹脂クリヤー |
| Water-based / Solvent-based | Mild solvent-based, 2-component |
| 1K / 2K | 2-component (2K) |
Application Specifications
| Dilution | Brush / Roller: 0–10% airless: 5–15% Air spray (conventional spray): 15–40% |
|---|---|
| Thinner / Diluent | 塗料用シンナーA (paint thinner A) |
| Number of Coats | 2 coats (1st coat is gloss) |
| Coverage (consumption) | 107–125 m²/15 kg (0.12–0.14 kg/m²) |
| Recoat Time (drying interval) | 23°C: 4 or more |
| Mixing Ratio | Base (Comp. A) 4:Hardener (Comp. B) 1 |
| Pot Life | 6 hours or less (23°C) |
| Field Notes (JA) | ・ 上塗材ロイヤルセラクリヤー（艶有、3分艶）の値。表1の施工方法別希釈率を工法ごとに分離。所要量は工程表の上塗り行（107～125㎡/15kg）を全工法に適用。1回目の上塗は必ず艶有を使用。 ・ 可使時間は6時間以内(23℃)。窯業系サイディングは補修とエフロレッセンス除去後に高圧洗浄・乾燥し、事前に試し塗りで付着性を確認する(経年サイディングは表層内劣化部から剥離のおそれ)。気温5℃以下・湿度85%以上または結露・降雨・降雪・強風のおそれがある場合は施工しない。 |
⚠️ Cautions & Notes (Japanese original)
To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.
- 公式施工要領書: https://www.kikusui-chem.co.jp/products/catalog/cat_royalsel_all_3-2.pdf
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of 菊水化学工業