日本ペイント
水性デュフロン100上塗
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | 日本ペイント |
|---|---|
| Use / Type | Resin: Fluoropolymer Original (JA): 非危険物水性ふっ素樹脂上塗り塗料 |
| Water-based / Solvent-based | Water-based, 2-component |
| 1K / 2K | 2-component (2K) |
Application Specifications
| Dilution | 0–5% |
|---|---|
| Thinner / Diluent | Tap water |
| Number of Coats | 1 coat(s) |
| Coverage (consumption) | Brush, Roller: 0.12 kg/m²/coat / airless spray: 0.14 kg/m²/coat |
| Mixing Ratio | Base (Comp. A) 7:Hardener (Comp. B) 1 |
| Pot Life | 6 hours (23°C) |
⚠️ Cautions & Notes (Japanese original)
To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.
- 耐薬品・耐溶剤・耐候性◎・水性で人体・環境に優しい
- 水希釈は5%以下を厳守（希釈しすぎはダレ・ハジキ）
- まず希釈なしで塗装→粘度高い時のみ希釈
- 開缶後は皮張りやすい→希釈剤をうすく張ってふた
- 塗装終了後4時間以内に5℃以下になる予想時は施工不可
- 増粘しにくいため可使時間は時刻管理（過ぎたら使用NG）
- 反応硬化形→水性塗料反応硬化用刷毛を使用（一般刷毛は固まる・ダマ）
- 白化したらペーパー or シンナー拭き等で除去してから塗り重ね
- 一度に厚塗りすると乾燥不良→適正膜厚で塗装
- 洗い溶剤は水道水（落ちにくい時はラッカーシンナー）
- 新設亜鉛面・コンクリート・没水部への適用NG
- 中・上塗りには水性塗料を使用
- 公式施工要領書: https://s3b-prd-nptuweb-01.s3.ap-northeast-1.amazonaws.com/product/document/document_file/%E6%B0%B4%E6%80%A7%E3%83%87%E3%83%A5%E3%83%95%E3%83%AD%E3%83%B3100%E4%B8%8A%E5%A1%97.pdf
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of 日本ペイント