日本ペイント
テツゾールPE-300 黒
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | 日本ペイント |
|---|---|
| Use / Type | Resin: Silicone ｜ Features: Heat-resistant Original (JA): 耐熱・耐薬品性変性シリコーン樹脂塗料（300℃以下） |
| Water-based / Solvent-based | Solvent-based, 1-component |
| 1K / 2K | 1-component (1K) |
Application Specifications
| Dilution | Brush / Roller: 0–5% Airless spray: 5–15% |
|---|---|
| Thinner / Diluent | テツゾール専用シンナー |
| Number of Coats | 3–4 |
| Coverage (consumption) | Brush / Roller: 0.18 kg/m²/coat Airless spray: 0.21 kg/m²/coat |
⚠️ Cautions & Notes (Japanese original)
To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.
- 耐熱温度: 300℃以下
- 耐熱・耐酸・耐アルカリ性に特にすぐれる
- シリコン系のため他塗料と混じらない様に注意
- 過度の膜厚で塗膜が脆くなる→厚塗りを避ける
- 加熱して初めて本来の性能発揮（塗装時期は運転開始時期に近づける）
- 急加熱は剥離原因 → 200℃/時以下の昇温速度で徐々に
- 初回は180℃×30分以上の加熱が必須（性能定着）
- 高温→外気急冷で割れ・はがれ → 徐々に冷却
- はけ通しでブリード現象 → 棒塗り（はけ返し最小限に）
- 塗料が付着したウエス・ダンボール等の可燃物は自然発火の恐れ→速やかに廃却 or 水に浸す
- 公式施工要領書: https://s3b-prd-nptuweb-01.s3.ap-northeast-1.amazonaws.com/product/document/document_file/_3-744RXD-00-01.pdf
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of 日本ペイント