ロックペイント
クリスタルロック ＵＶガードクリヤー
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | ロックペイント |
|---|---|
| Use / Type | Resin: Silicone Original (JA): 2液弱溶剤型超高性能クリヤー（弱溶剤二液型アクリルシリコン樹脂塗料） |
| Water-based / Solvent-based | Mild solvent-based, 2-component |
| 1K / 2K | 2-component (2K) |
Application Specifications
| Dilution | Brush / Roller: 5–15% airless: 15–20% |
|---|---|
| Thinner / Diluent | 塗料用シンナー (paint thinner) |
| Number of Coats | 2 |
| Coverage (consumption) | 0.11–0.13 kg/m² · coat(s) (115–135 m²/15 kg set (kit) · coat(s)) |
| Recoat Time (drying interval) | 5°C: 8 hours or more 23°C: 4 hours or more 30°C: 2 hours or more |
| Mixing Ratio | Base (Comp. A) 4:Hardener (Comp. B) 1 |
| Pot Life | 5 hours (23°C) |
| Field Notes (JA) | ・ 気温5℃以下（塗装後24時間含む）・湿度85％以上は塗装回避。 ・ クリヤーのため下地の状態がそのまま反映され、除去できないエフロレッセンスやチョーキングがある場合は施工回避（エナメル塗装を推奨） ・ シーリング材は原則後打ちで施工し、希釈には必ず塗料用シンナー、硬化剤は専用品を可使時間（23℃で5時間）内に使用。 |
⚠️ Cautions & Notes (Japanese original)
To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.
- 公式製品説明書: https://www.rockpaint.co.jp/architecture/data/manual/159-0150_info.pdf
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of ロックペイント