エスケー化研
ダンツーキャスト
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | エスケー化研 |
|---|---|
| Use / Type | Use: Exterior Wall Original (JA): 複層仕上塗材 主材 |
| Water-based / Solvent-based | Water-based, 2-component |
| 1K / 2K | 2-component (2K) |
Application Specifications
| Dilution | texture spray gun (Nozzle diameter 4–6 mm, pressure 490–686kPa(5–7kgf/㎠)) Main (texture) coat application (1) Base layer: 3–5% Texture hopper gun (tile gun) (Nozzle diameter 6.5–8 mm, pressure 392–588kPa(4–6kgf/㎠)) Main (texture) coat application (2)模様塗り吹放し: 0–2% Texture hopper gun (tile gun) (Nozzle diameter 4–6.5 mm, pressure 392–588kPa(4–6kgf/㎠)) Main (texture) coat application (2)模様塗り小粒仕上げ: 0–2% Brush / Roller: |
|---|---|
| Thinner / Diluent | Tap water For thinning|塗料用シンナーA (paint thinner A) (For knockdown (smoothing) use · thinningではない) |
| Number of Coats | texture spray gun (Nozzle diameter 4–6 mm, pressure 490–686kPa(5–7kgf/㎠)) Main (texture) coat application (1) Base layer: 1–2 coat(s) Texture hopper gun (tile gun) (Nozzle diameter 6.5–8 mm, pressure 392–588kPa(4–6kgf/㎠)) Main (texture) coat application (2)模様塗り吹放し: 1 coat(s) Texture hopper gun (tile gun) (Nozzle diameter 4–6.5 mm, pressure 392–588kPa(4–6kgf/㎠)) Main (texture) coat application (2)模様塗り小粒仕上げ: 1 coat(s) Brush / Roller: 1 |
| Coverage (consumption) | texture spray gun (Nozzle diameter 4–6 mm, pressure 490–686kPa(5–7kgf/㎠)) Main (texture) coat application (1) Base layer: 1.3–1.7 kg/m² Texture hopper gun (tile gun) (Nozzle diameter 6.5–8 mm, pressure 392–588kPa(4–6kgf/㎠)) Main (texture) coat application (2)模様塗り吹放し: 0.7–0.9 kg/m² Texture hopper gun (tile gun) (Nozzle diameter 4–6.5 mm, pressure 392–588kPa(4–6kgf/㎠)) Main (texture) coat application (2)模様塗り小粒仕上げ: 0.4–0.6 kg/m² Brush / Roller: |
| Recoat Time (drying interval) | 23°C: Main (texture) coat application (1) Base layer within the step 4 or more · between steps 4 or more, Main (texture) coat application (2) Pattern (texture) layer between steps 18 or more (As-sprayed (spray texture) finish) , Knockdown (flattening high spots) between steps 18 or more (hours) |
| Mixing Ratio | Base (Comp. A) 100:Hardener (Comp. B) 1 |
| Pot Life | — |
⚠️ Cautions & Notes (Japanese original)
To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.
- 公式カタログ: https://www.sk-kaken.co.jp/wp/wp-content/uploads/dantsucoat_dantsucast.pdf
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of エスケー化研