エスケー化研
SKセラミフロアー
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | エスケー化研 |
|---|---|
| Use / Type | Use: Floor ｜ Resin: Silicone Original (JA): 二液溶剤形アクリルシリコン樹脂系塗床材 |
| Water-based / Solvent-based | Solvent-based, 2-component |
| 1K / 2K | 2-component (2K) |
Application Specifications
| Dilution | 0–10% |
|---|---|
| Thinner / Diluent | SKセラミフロアーシンナー |
| Number of Coats | Brush / Roller: 2 Brush / Roller: 1 |
| Coverage (consumption) | Brush / Roller: 0.28 kg/m² Brush / Roller: 0.16 kg/m² Brush / Roller: 0.22 kg/m² |
| Recoat Time (drying interval) | 23°C: within the step 1 or more 7 days or less, final curing 24 or more (hours) |
| Mixing Ratio | Base (Comp. A) 14:Hardener (Comp. B) 1 |
| Pot Life | 8 hours (5°C, 65% RH (relative humidity)) |
| Field Notes (JA) | ・ 気温5℃以下・湿度85%RH以上での施工は白化や硬化不良の原因となるため不可。下地コンクリートは高周波水分計で含水率5%以下を確認する。施工後24時間で歩行可能だが、耐薬品性の発揮には1週間（23℃）の最終養生が必要。 |
⚠️ Cautions & Notes (Japanese original)
To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.
- 公式カタログ: https://www.sk-kaken.co.jp/wp/wp-content/uploads/ceramifloor.pdf
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of エスケー化研