エスケー化研
セラミクリーンタイル
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | エスケー化研 |
|---|---|
| Use / Type | Use: Exterior Wall ｜ Resin: Inorganic ｜ Features: Elastomeric, Waterproof Original (JA): 高耐久・低汚染型水性セラミックシリコン樹脂系単層弾性塗材（JIS A 6909 防水形外装薄塗材E／艶有り） |
| Water-based / Solvent-based | Water-based, 1-component |
| 1K / 2K | 1-component (1K) |
Application Specifications
| Dilution | Main (texture) coat application① (Base layer) As-sprayed (spray texture) finish · raised-part treatment finish (リシンガン口径4–6 mm, pressure 392–588kPa): 5–8% Main (texture) coat application② (Pattern (texture) layer) As-sprayed (spray texture) finish · raised-part treatment finish (タイルガン口径6.5–8 mm, pressure 392–588kPa): 0–3% Brush / Roller: － |
|---|---|
| Thinner / Diluent | Tap water For thinning|塗料用シンナーA (paint thinner A) (凸部処理用 · thinningではない) |
| Number of Coats | Main (texture) coat application① (Base layer) As-sprayed (spray texture) finish · raised-part treatment finish (リシンガン口径4–6 mm, pressure 392–588kPa): 1–2 coat(s) Main (texture) coat application② (Pattern (texture) layer) As-sprayed (spray texture) finish · raised-part treatment finish (タイルガン口径6.5–8 mm, pressure 392–588kPa): 1 coat(s) Brush / Roller: － |
| Coverage (consumption) | Main (texture) coat application① (Base layer) As-sprayed (spray texture) finish · raised-part treatment finish (リシンガン口径4–6 mm, pressure 392–588kPa): 0.7–1.2 kg/m²/coat Main (texture) coat application② (Pattern (texture) layer) As-sprayed (spray texture) finish · raised-part treatment finish (タイルガン口径6.5–8 mm, pressure 392–588kPa): 0.6–1.0 kg/m²/coat Brush / Roller: |
| Recoat Time (drying interval) | 23°C: Main (texture) coat application① within the step 2 or more, between steps 2 or more (hr) 23°C: Main (texture) coat application② between steps 0.5 or less (raised-part treatment finishの場合) /final curing 24 or more (As-sprayed (spray texture) finish) (hr) 23°C: Knockdown (flattening high spots) final curing 24 or more (hr) |
| Field Notes (JA) | ・ 凸部処理は模様塗り後0.5時間以内（乾燥前）に行う。凸部処理に灯油など指定外の材料の使用は厳禁。上塗り不要の単層仕上げ。 |
⚠️ Cautions & Notes (Japanese original)
To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.
- 公式カタログ: https://www.sk-kaken.co.jp/wp/wp-content/uploads/ceramiclean-tile.pdf
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of エスケー化研