エスケー化研
レナエクセレントA
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | エスケー化研 |
|---|---|
| Use / Type | Use: Exterior Wall ｜ Resin: Acrylic ｜ Features: Waterproof Original (JA): JIS A 6021 アクリルゴム系1成分形 防水形複層仕上塗材主材／吹付用 |
| Water-based / Solvent-based | Water-based, 1-component |
| 1K / 2K | 1-component (1K) |
Application Specifications
| Dilution | As-sprayed (spray texture) finish · Base layer (Main (texture) coat application 1st application/リシンガン口径4–6 mm · pressure 490–686kPa): 3–5% As-sprayed (spray texture) finish · Pattern (texture) layer (Main (texture) coat application 2nd application/タイルガン口径6.5–8 mm · pressure 392–588kPa): 0–2% Brush / Roller: — Fine-texture finish · Base layer (Main (texture) coat application 1st application/リシンガン口径4–6 mm · pressure 490–686kPa): 3–5% Fine-texture finish · Pattern (texture) layer (Main (texture) coat application 2nd application/タイルガン口径4–6.5 mm · pressure 392–588kPa): 0–2% |
|---|---|
| Thinner / Diluent | Tap water For thinning|塗料用シンナーA (paint thinner A) (Knockdown (flattening high spots)) |
| Number of Coats | As-sprayed (spray texture) finish · Base layer (Main (texture) coat application 1st application/リシンガン口径4–6 mm · pressure 490–686kPa): 1 As-sprayed (spray texture) finish · Pattern (texture) layer (Main (texture) coat application 2nd application/タイルガン口径6.5–8 mm · pressure 392–588kPa): 1 Brush / Roller: — Fine-texture finish · Base layer (Main (texture) coat application 1st application/リシンガン口径4–6 mm · pressure 490–686kPa): 1 Fine-texture finish · Pattern (texture) layer (Main (texture) coat application 2nd application/タイルガン口径4–6.5 mm · pressure 392–588kPa): 1 |
| Coverage (consumption) | As-sprayed (spray texture) finish · Base layer (Main (texture) coat application 1st application/リシンガン口径4–6 mm · pressure 490–686kPa): 1.5–1.8 kg/m² As-sprayed (spray texture) finish · Pattern (texture) layer (Main (texture) coat application 2nd application/タイルガン口径6.5–8 mm · pressure 392–588kPa): 0.7–0.9 kg/m² Brush / Roller: — Fine-texture finish · Base layer (Main (texture) coat application 1st application/リシンガン口径4–6 mm · pressure 490–686kPa): 1.5–1.8 kg/m² Fine-texture finish · Pattern (texture) layer (Main (texture) coat application 2nd application/タイルガン口径4–6.5 mm · pressure 392–588kPa): 0.4–0.6 kg/m² |
| Recoat Time (drying interval) | 23°C: between steps (base layer→pattern (texture)) 3 or more hr, Pattern (texture) layer→Top coat 18 or more hr. Fine-texture finishの模様塗り工程間は18 or more hr |
| Field Notes (JA) | ・ 下地は含水率10％以下・pH10以下とする。気温5℃以下・湿度85％以上での施工は原則避ける。 |
⚠️ Cautions & Notes (Japanese original)
To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.
- 公式カタログ: https://www.sk-kaken.co.jp/wp/wp-content/uploads/lenaexcellent-a.pdf
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of エスケー化研