エスケー化研
ソフトスタッコ
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | エスケー化研 |
|---|---|
| Use / Type | Use: Exterior Wall ｜ Resin: Acrylic ｜ Features: Elastomeric Original (JA): 外装合成樹脂エマルション系厚付け仕上塗材（外装厚塗材E）・弾性アクリルスタッコ |
| Water-based / Solvent-based | Water-based, 1-component |
| 1K / 2K | 1-component (1K) |
Application Specifications
| Dilution | Main (texture) coat application (1) (Base layer) /lithin gun or tile-gun nozzle diameter 6–6.5 mm pressure 392–588kPa (4–6kgf/c m²): 5.0–6.5% Main (texture) coat application (2) (Pattern (texture) layer) /stucco-gun nozzle diameter 8–12 mm pressure 392–588kPa (4–6kgf/c m²): 0–1% Brush / Roller: Main (texture) coat application (2) (Pattern (texture) layer) /small-grain finish, tile gun nozzle dia. 6.5–8 mm spray pressure 196–294kPa (2–3kgf/c m²): 5.0–6.5% |
|---|---|
| Thinner / Diluent | Tap water For thinning|塗料用シンナーA (paint thinner A) (thinningでなく押さえ用途 · Knockdown (flattening high spots)) |
| Number of Coats | Main (texture) coat application (1) (Base layer) /lithin gun or tile-gun nozzle diameter 6–6.5 mm pressure 392–588kPa (4–6kgf/c m²): 1 Main (texture) coat application (2) (Pattern (texture) layer) /stucco-gun nozzle diameter 8–12 mm pressure 392–588kPa (4–6kgf/c m²): 1 Brush / Roller: Main (texture) coat application (2) (Pattern (texture) layer) /small-grain finish, tile gun nozzle dia. 6.5–8 mm spray pressure 196–294kPa (2–3kgf/c m²): 1 coat(s) |
| Coverage (consumption) | Main (texture) coat application (1) (Base layer) /lithin gun or tile-gun nozzle diameter 6–6.5 mm pressure 392–588kPa (4–6kgf/c m²): 1.3–2.0 kg/m² Main (texture) coat application (2) (Pattern (texture) layer) /stucco-gun nozzle diameter 8–12 mm pressure 392–588kPa (4–6kgf/c m²): 2.0–2.5 kg/m² Brush / Roller: Main (texture) coat application (2) (Pattern (texture) layer) /small-grain finish, tile gun nozzle dia. 6.5–8 mm spray pressure 196–294kPa (2–3kgf/c m²): 1.0–1.2 kg/m² |
| Recoat Time (drying interval) | 23°C: Main (texture) coat application (1) (Base layer) : between steps 4 or more hr/Main (texture) coat application (2) (Pattern (texture) layer) : between steps As-sprayed (spray texture) finish 24 or more hr (Knockdown (flattening high spots)はwithin the step 0.5 or less hr, 凸部処理工程はbetween steps 24 or more hr) |
⚠️ Cautions & Notes (Japanese original)
To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of エスケー化研
Page updated: 2026-08-26