エスケー化研
水性コンポアクリル
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | エスケー化研 |
|---|---|
| Use / Type | Resin: Acrylic Original (JA): 水性反応硬化形アクリル樹脂塗料 |
| Water-based / Solvent-based | Water-based, 1-component |
| 1K / 2K | 1-component (1K) |
Application Specifications
| Dilution | Top coat (Roller · brush · smooth finish): 0–10% Top coat (airless spray · smooth finish): 10–20% Topcoat (roller, brush; multi-layer coating E/RE, sprayed tile finish): 0–10% ▼5 more application methods are collapsed (of 8 total)Collapse againTopcoat (airless spray; multi-layer coating E/RE, sprayed tile finish): 10–20% Topcoat (roller, brush; repaint, heavy-build/thin-build finish): 0–10% Topcoat (airless spray; repaint, heavy-build/thin-build finish): 10–20% Top coat (Roller · brush · Aluminum-coating specification): 0–10% Top coat (airless spray · Aluminum-coating specification): 10–20% |
|---|---|
| Thinner / Diluent | Tap water For thinning |
| Number of Coats | 2 coat(s) |
| Coverage (consumption) | Top coat (Roller · brush · smooth finish): 0.25–0.30 kg/m² (2 coats' worth) Top coat (airless spray · smooth finish): 0.25–0.30 kg/m² (2 coats' worth) Topcoat (roller, brush; multi-layer coating E/RE, sprayed tile finish): 0.25–0.35 kg/m² (2 coats' worth) ▼5 more application methods are collapsed (of 8 total)Collapse againTopcoat (airless spray; multi-layer coating E/RE, sprayed tile finish): 0.25–0.35 kg/m² (2 coats' worth) Topcoat (roller, brush; repaint, heavy-build/thin-build finish): 0.25–0.35 kg/m² (2 coats' worth) Topcoat (airless spray; repaint, heavy-build/thin-build finish): 0.25–0.35 kg/m² (2 coats' worth) Top coat (Roller · brush · Aluminum-coating specification): 0.25–0.30 kg/m² (2 coats' worth) Top coat (airless spray · Aluminum-coating specification): 0.25–0.30 kg/m² (2 coats' worth) |
| Recoat Time (drying interval) | 23°C: between undercoat steps 2 or more, Within the top-coat process 2 or more, final curing 24 or more (hours) |
| Field Notes (JA) | ・ 下地はよく乾燥させ含水率10%以下・pH10以下とする。気温5℃以下・湿度85%以上は原則施工不可（要求時は採暖で被塗面5℃以上に）。 |
⚠️ Cautions & Notes (Japanese original)
To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of エスケー化研
Page updated: 2026-09-03