エスケー化研
ベルアートF
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | エスケー化研 |
|---|---|
| Use / Type | Resin: Fluoropolymer Original (JA): ふっ素樹脂系厚付け仕上塗材（高耐候・意匠性壁面仕上材） |
| Water-based / Solvent-based | Water-based, 1-component |
| 1K / 2K | 1-component (1K) |
Application Specifications
| Dilution | Main (texture) coat application① (Base layer) (SKK Super Gun (dedicated sprayer) (Universal texture spray gun) Nozzle diameter: 4–6 mm pressure:392–588kPa (4–6kgf/cm2)) :10–15% (Clean water. ベルアートシリーズ100 by weight) Main (texture) coat application① (Base layer) (Plastering trowel): 0–3% (Clean water. ベルアートシリーズ100 by weight) flat finish (Exterior specification) /Main (texture) coat application② (Pattern (texture) layer) (SKK Super Gun (dedicated sprayer) (Universal texture spray gun) Nozzle diameter: 4–6 mm pressure:392–588kPa (4–6kgf/cm2)) :10–15% (Clean water. ベルアートシリーズ100 by weight) ▼53 more application methods are collapsed (of 56 total)Collapse againSpray tile finish/Main (texture) coat application② (Pattern (texture) layer) (tile-gun nozzle diameter: 6.5–8 mm pressure:392–588kPa (4–6kgf/cm2)) :4–6% (Clean water. ベルアートシリーズ100 by weight) Stucco finish/Main (texture) coat application② (Pattern (texture) layer) (stucco-gun nozzle diameter: 8–12 mm pressure:392–588kPa (4–6kgf/cm2)) :3–6% (Clean water. ベルアートシリーズ100 by weight. シポサンド100 is separate (The official coverage figure refers to the mixed material quantity)) Juraku finish/Main (texture) coat application② (Pattern (texture) layer) (SKK Super Gun (dedicated sprayer) (Universal texture spray gun) Nozzle diameter: 4–6 mm pressure:392–588kPa (4–6kgf/cm2)) :15–20% (Clean water. ベルアートシリーズ100 by weight. marble chips 1 rin (marble-chip grain-size grade) 50 is separate (The official coverage figure refers to the mixed material quantity)) Sand-texture spray finish (rishin)/Main (texture) coat application② (Pattern (texture) layer) (texture-gun nozzle diameter: 4–6 mm pressure:392–588kPa (4–6kgf/cm2)) :20–25% (Clean water. ベルアートシリーズ100 by weight. シポサンド100 is separate (The official coverage figure refers to the mixed material quantity)) Orange-peel texture finish/Main (texture) coat application② (Pattern (texture) layer) (SKK Super Gun (dedicated sprayer) (Universal texture spray gun) Nozzle diameter: 4–6 mm pressure:392–588kPa (4–6kgf/cm2)) :6–8% (Clean water. ベルアートシリーズ100 by weight) wave texture finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/Ｋ-1 (kubari (spreading coat)) Roller/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :0–3% (Clean water. ベルアートシリーズ100 by weight) Wave 2-color finish/Main (texture) coat application② (Pattern (texture) layer) and pattern forming (Plastering trowel): 0–2% (Clean water. ベルアートシリーズ100 by weight) Stamp finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/stucco-gun nozzle diameter: 8–12 mm pressure:392–588kPa (4–6kgf/cm2)) :3–6% (Clean water. ベルアートシリーズ100 by weight. シポサンド100 is separate (The official coverage figure refers to the mixed material quantity)) Large Stamp finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :2–4% (Clean water. ベルアートシリーズ100 by weight. marble chips 5 rin (marble-chip grain-size grade) 50 · marble chips 1 rin (marble-chip grain-size grade) 50 is separate (The official coverage figure refers to the mixed material quantity)) Forest finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/Ｋ-1 (kubari (spreading coat)) Roller/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :0–3% (Clean water. ベルアートシリーズ100 by weight) Travertine finish/Main (texture) coat application② (Pattern (texture) layer) (stucco-gun nozzle diameter: 8–12 mm pressure:392–588kPa (4–6kgf/cm2)) :3–6% (Clean water. ベルアートシリーズ100 by weight. シポサンド100 is separate (The official coverage figure refers to the mixed material quantity)) Storm finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/Ｋ-1 (kubari (spreading coat)) Roller/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :0–3% (Clean water. ベルアートシリーズ100 by weight) Comb-drawn (combed) finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/stucco-gun nozzle diameter: 8–12 mm pressure:392–588kPa (4–6kgf/cm2)) :3–6% (Clean water. ベルアートシリーズ100 by weight. シポサンド100 is separate (The official coverage figure refers to the mixed material quantity)) Scratch finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :3–5% (Clean water. ベルアートシリーズ100 by weight) Float finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :0–1% (Clean water. ベルアートシリーズ100 by weight) River finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :0–1% (Clean water. ベルアートシリーズ100 by weight) Flower finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/Ｋ-1 (kubari (spreading coat)) Roller/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :0–2% (Clean water. ベルアートシリーズ100 by weight) Drop finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/Ｋ-1 (kubari (spreading coat)) Roller/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :3–5% (Clean water. ベルアートシリーズ100 by weight) Glass finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/Ｋ-1 (kubari (spreading coat)) Roller/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :3–5% (Clean water. ベルアートシリーズ100 by weight) Woody finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/Ｋ-1 (kubari (spreading coat)) Roller/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :0–2% (Clean water. ベルアートシリーズ100 by weight) Canyon finish/Main (texture) coat application② (Pattern (texture) layer) (stucco-gun nozzle diameter: 8–12 mm pressure:392–588kPa (4–6kgf/cm2)) :3–6% (Clean water. ベルアートシリーズ100 by weight. シポサンド100 is separate (The official coverage figure refers to the mixed material quantity)) Lime Tone finish/Main (texture) coat application② (Pattern (texture) layer) (stucco-gun nozzle diameter: 8–12 mm pressure:392–588kPa (4–6kgf/cm2)) :3–6% (Clean water. ベルアートシリーズ100 by weight. シポサンド100 is separate (The official coverage figure refers to the mixed material quantity)) Hairline finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel): 0–3% (Clean water. ベルアートシリーズ100 by weight) Ripple finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel): 0–3% (Clean water. ベルアートシリーズ100 by weight) Draw finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel): 3–5% (Clean water. ベルアートシリーズ100 by weight) Tail L finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/stucco-gun nozzle diameter: 8–12 mm pressure:392–588kPa (4–6kgf/cm2)) :2–4% (Clean water. ベルアートシリーズ100 by weight. marble chips 8 rin (marble-chip grain-size grade) 50 · marble chips 1 rin (marble-chip grain-size grade) 50 is separate (The official coverage figure refers to the mixed material quantity)) Tail S finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :2–4% (Clean water. ベルアートシリーズ100 by weight. marble chips 5 rin (marble-chip grain-size grade) 50 · marble chips 1 rin (marble-chip grain-size grade) 50 is separate (The official coverage figure refers to the mixed material quantity)) Shirasu (volcanic ash aggregate) L finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/stucco-gun nozzle diameter: 8–12 mm pressure:392–588kPa (4–6kgf/cm2)) :3–6% (Clean water. ベルアートシリーズ100 by weight. シポサンド100 is separate (The official coverage figure refers to the mixed material quantity)) Shirasu (volcanic ash aggregate) S finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :0–1% (Clean water. ベルアートシリーズ100 by weight) プレスL finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/stucco-gun nozzle diameter: 8–12 mm pressure:392–588kPa (4–6kgf/cm2)) :1–3% (Clean water. ベルアートシリーズ100 by weight. marble chips 8 rin (marble-chip grain-size grade) 50 · marble chips 5 rin (marble-chip grain-size grade) 50 is separate (The official coverage figure refers to the mixed material quantity)) プレスS finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :3–6% (Clean water. ベルアートシリーズ100 by weight. シポサンド100 is separate (The official coverage figure refers to the mixed material quantity)) Provence finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/stucco-gun nozzle diameter: 8–12 mm pressure:392–588kPa (4–6kgf/cm2)) :3–6% (Clean water. ベルアートシリーズ100 by weight. シポサンド100 is separate (The official coverage figure refers to the mixed material quantity)) Sandstorm finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :3–5% (Clean water. ベルアートシリーズ100 by weight) Scroll finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :2–4% (Clean water. ベルアートシリーズ100 by weight. marble chips 5 rin (marble-chip grain-size grade) 50 · marble chips 1 rin (marble-chip grain-size grade) 50 is separate (The official coverage figure refers to the mixed material quantity)) Shirasu (volcanic ash aggregate) AL finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :0–3% (Clean water. ベルアートシリーズ100 by weight) Shirasu (volcanic ash aggregate) FL finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :0–3% (Clean water. ベルアートシリーズ100 by weight. marble chips 1 rin (marble-chip grain-size grade) 50 is separate (The official coverage figure refers to the mixed material quantity)) Fancy finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :2–4% (Clean water. ベルアートシリーズ100 by weight. marble chips 5 rin (marble-chip grain-size grade) 50 · marble chips 1 rin (marble-chip grain-size grade) 50 is separate (The official coverage figure refers to the mixed material quantity)) Vortex finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :0–3% (Clean water. ベルアートシリーズ100 by weight) Shirasu Smooth finish (smooth volcanic-ash-textured finish)/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/stucco-gun nozzle diameter: 8–12 mm pressure:392–588kPa (4–6kgf/cm2)) :3–6% (Clean water. ベルアートシリーズ100 by weight. シポサンド100 is separate (The official coverage figure refers to the mixed material quantity)) Splash finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :0–3% (Clean water. ベルアートシリーズ100 by weight) Feather finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :2–4% (Clean water. ベルアートシリーズ100 by weight. marble chips 5 rin (marble-chip grain-size grade) 50 · marble chips 1 rin (marble-chip grain-size grade) 50 is separate (The official coverage figure refers to the mixed material quantity)) Gelato finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :0–3% (Clean water. ベルアートシリーズ100 by weight. marble chips 1 rin (marble-chip grain-size grade) 50 is separate (The official coverage figure refers to the mixed material quantity)) Rough Wave finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :0–3% (Clean water. ベルアートシリーズ100 by weight. marble chips 1 rin (marble-chip grain-size grade) 50 is separate (The official coverage figure refers to the mixed material quantity)) Rough Wave 2-color finish/Main (texture) coat application② (Pattern (texture) layer) and pattern forming (Plastering trowel): 0–3% (Clean water. ベルアートシリーズ100 by weight. marble chips 1 rin (marble-chip grain-size grade) 50 · marble chips 1 rin (marble-chip grain-size grade) 50 is separate (The official coverage figure refers to the mixed material quantity)) Weathered Rock finish/Main (texture) coat application① (Base layer) (SKK Super Gun (dedicated sprayer) (Universal texture spray gun) Nozzle diameter: 4–6 mm pressure:392–588kPa (4–6kgf/cm2)) :10–15% (Clean water. ベルアートシリーズ100 by weight) Weathered Rock finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/stucco-gun nozzle diameter: 8–12 mm pressure:392–588kPa (4–6kgf/cm2)) :1–3% (Clean water. ベルアートシリーズ100 by weight. marble chips 8 rin (marble-chip grain-size grade) 50 · marble chips 5 rin (marble-chip grain-size grade) 50 is separate (The official coverage figure refers to the mixed material quantity)) Weathered Rock finish/Main (texture) coat application③ (Pattern (texture) layer) (SKK Super Gun (dedicated sprayer) (Universal texture spray gun) Nozzle diameter: 4–6 mm pressure:392–588kPa (4–6kgf/cm2)) :15–20% (Clean water. ベルアートシリーズ100 by weight. marble chips 3 rin (marble-chip grain-size grade) 25 · marble chips 1 rin (marble-chip grain-size grade) 50 is separate (The official coverage figure refers to the mixed material quantity)) プレスL 2-color finish/Main (texture) coat application① (Pattern (texture) layer) (Plastering trowel/stucco-gun nozzle diameter: 8–12 mm pressure:392–588kPa (4–6kgf/cm2)) :1–3% (Clean water. ベルアートシリーズ100 by weight. marble chips 8 rin (marble-chip grain-size grade) 50 · marble chips 5 rin (marble-chip grain-size grade) 50 is separate (The official coverage figure refers to the mixed material quantity)) プレスL 2-color finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel): 1–3% (Clean water. ベルアートシリーズ100 by weight. marble chips 8 rin (marble-chip grain-size grade) 50 · marble chips 5 rin (marble-chip grain-size grade) 50 is separate (The official coverage figure refers to the mixed material quantity)) Sagan finish/Main (texture) coat application① (Base layer) (Plastering trowel/SKK Super Gun (dedicated sprayer) (Universal texture spray gun) Nozzle diameter: 4–6 mm pressure:392–588kPa (4–6kgf/cm2)) :0–15% (Clean water. ベルアートシリーズ100 by weight) Sagan finish/Main (texture) coat application② (Pattern (texture) layer) and pattern forming (Plastering trowel): 0–3% (Clean water. ベルアートシリーズ100 by weight. marble chips 3 rin (marble-chip grain-size grade) 50 is separate (The official coverage figure refers to the mixed material quantity)) サガン2-color finish/Main (texture) coat application① (Base layer) (Plastering trowel/SKK Super Gun (dedicated sprayer) (Universal texture spray gun) Nozzle diameter: 4–6 mm pressure:392–588kPa (4–6kgf/cm2)) :0–15% (Clean water. ベルアートシリーズ100 by weight) サガン2-color finish/Main (texture) coat application② (Pattern (texture) layer) and pattern forming (Plastering trowel): 0–3% (Clean water. ベルアートシリーズ100 by weight. marble chips 3 rin (marble-chip grain-size grade) 50 · marble chips 3 rin (marble-chip grain-size grade) 50 is separate (The official coverage figure refers to the mixed material quantity)) |
|---|---|
| Thinner / Diluent | Tap water |
| Number of Coats | 1 coat(s) |
| Coverage (consumption) | Main (texture) coat application① (Base layer) (SKK Super Gun (dedicated sprayer) (Universal texture spray gun) Nozzle diameter: 4–6 mm pressure:392–588kPa (4–6kgf/cm2)) :1.0–1.2 kg/m² Main (texture) coat application① (Base layer) (Plastering trowel): 1.0–1.2 kg/m² flat finish (Exterior specification) /Main (texture) coat application② (Pattern (texture) layer) (SKK Super Gun (dedicated sprayer) (Universal texture spray gun) Nozzle diameter: 4–6 mm pressure:392–588kPa (4–6kgf/cm2)) :0.8–1.0 kg/m² ▼53 more application methods are collapsed (of 56 total)Collapse againSpray tile finish/Main (texture) coat application② (Pattern (texture) layer) (tile-gun nozzle diameter: 6.5–8 mm pressure:392–588kPa (4–6kgf/cm2)) :0.8–1.2 kg/m² Stucco finish/Main (texture) coat application② (Pattern (texture) layer) (stucco-gun nozzle diameter: 8–12 mm pressure:392–588kPa (4–6kgf/cm2)) :3.0–3.5 kg/m² Juraku finish/Main (texture) coat application② (Pattern (texture) layer) (SKK Super Gun (dedicated sprayer) (Universal texture spray gun) Nozzle diameter: 4–6 mm pressure:392–588kPa (4–6kgf/cm2)) :1.0–1.2 kg/m² Sand-texture spray finish (rishin)/Main (texture) coat application② (Pattern (texture) layer) (texture-gun nozzle diameter: 4–6 mm pressure:392–588kPa (4–6kgf/cm2)) :1.2–1.4 kg/m² Orange-peel texture finish/Main (texture) coat application② (Pattern (texture) layer) (SKK Super Gun (dedicated sprayer) (Universal texture spray gun) Nozzle diameter: 4–6 mm pressure:392–588kPa (4–6kgf/cm2)) :0.7–0.9 kg/m² wave texture finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/Ｋ-1 (kubari (spreading coat)) Roller/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :1.5–2.0 kg/m² Wave 2-color finish/Main (texture) coat application② (Pattern (texture) layer) and pattern forming (Plastering trowel): 1.5–2.0 kg/m² Stamp finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/stucco-gun nozzle diameter: 8–12 mm pressure:392–588kPa (4–6kgf/cm2)) :3.5–4.0 kg/m² Large Stamp finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :2.3–2.8 kg/m² Forest finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/Ｋ-1 (kubari (spreading coat)) Roller/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :1.5–2.0 kg/m² Travertine finish/Main (texture) coat application② (Pattern (texture) layer) (stucco-gun nozzle diameter: 8–12 mm pressure:392–588kPa (4–6kgf/cm2)) :3.5–4.0 kg/m² Storm finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/Ｋ-1 (kubari (spreading coat)) Roller/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :1.5–2.0 kg/m² Comb-drawn (combed) finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/stucco-gun nozzle diameter: 8–12 mm pressure:392–588kPa (4–6kgf/cm2)) :3.5–4.0 kg/m² Scratch finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :2.5–3.0 kg/m² Float finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :2.5–3.0 kg/m² River finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :2.5–3.0 kg/m² Flower finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/Ｋ-1 (kubari (spreading coat)) Roller/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :1.5–2.0 kg/m² Drop finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/Ｋ-1 (kubari (spreading coat)) Roller/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :1.5–2.0 kg/m² Glass finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/Ｋ-1 (kubari (spreading coat)) Roller/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :1.5–2.0 kg/m² Woody finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/Ｋ-1 (kubari (spreading coat)) Roller/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :1.5–2.0 kg/m² Canyon finish/Main (texture) coat application② (Pattern (texture) layer) (stucco-gun nozzle diameter: 8–12 mm pressure:392–588kPa (4–6kgf/cm2)) :3.5–4.0 kg/m² Lime Tone finish/Main (texture) coat application② (Pattern (texture) layer) (stucco-gun nozzle diameter: 8–12 mm pressure:392–588kPa (4–6kgf/cm2)) :3.5–4.0 kg/m² Hairline finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel): 1.5–2.0 kg/m² Ripple finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel): 1.5–2.0 kg/m² Draw finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel): 1.0–1.5 kg/m² Tail L finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/stucco-gun nozzle diameter: 8–12 mm pressure:392–588kPa (4–6kgf/cm2)) :3.5–4.0 kg/m² Tail S finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :2.3–2.8 kg/m² Shirasu (volcanic ash aggregate) L finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/stucco-gun nozzle diameter: 8–12 mm pressure:392–588kPa (4–6kgf/cm2)) :3.5–4.0 kg/m² Shirasu (volcanic ash aggregate) S finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :2.5–3.0 kg/m² プレスL finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/stucco-gun nozzle diameter: 8–12 mm pressure:392–588kPa (4–6kgf/cm2)) :3.5–4.0 kg/m² プレスS finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :2.3–2.8 kg/m² Provence finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/stucco-gun nozzle diameter: 8–12 mm pressure:392–588kPa (4–6kgf/cm2)) :3.0–3.5 kg/m² Sandstorm finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :2.0–2.5 kg/m² Scroll finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :2.3–2.8 kg/m² Shirasu (volcanic ash aggregate) AL finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :2.3–2.8 kg/m² Shirasu (volcanic ash aggregate) FL finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :2.3–2.8 kg/m² Fancy finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :2.3–2.8 kg/m² Vortex finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :2.0–2.5 kg/m² Shirasu Smooth finish (smooth volcanic-ash-textured finish)/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/stucco-gun nozzle diameter: 8–12 mm pressure:392–588kPa (4–6kgf/cm2)) :3.5–4.0 kg/m² Splash finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :2.0–2.5 kg/m² Feather finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :2.5–3.0 kg/m² Gelato finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :1.5–2.0 kg/m² Rough Wave finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/tile-gun nozzle diameter: 8–10 mm pressure:392–588kPa (4–6kgf/cm2)) :2.0–2.5 kg/m² Rough Wave 2-color finish/Main (texture) coat application② (Pattern (texture) layer) and pattern forming (Plastering trowel): 2.0–2.5 kg/m² Weathered Rock finish/Main (texture) coat application① (Base layer) (SKK Super Gun (dedicated sprayer) (Universal texture spray gun) Nozzle diameter: 4–6 mm pressure:392–588kPa (4–6kgf/cm2)) :1.0–1.2 kg/m² Weathered Rock finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel/stucco-gun nozzle diameter: 8–12 mm pressure:392–588kPa (4–6kgf/cm2)) :3.0–3.5 kg/m² Weathered Rock finish/Main (texture) coat application③ (Pattern (texture) layer) (SKK Super Gun (dedicated sprayer) (Universal texture spray gun) Nozzle diameter: 4–6 mm pressure:392–588kPa (4–6kgf/cm2)) :1.0–1.2 kg/m² プレスL 2-color finish/Main (texture) coat application① (Pattern (texture) layer) (Plastering trowel/stucco-gun nozzle diameter: 8–12 mm pressure:392–588kPa (4–6kgf/cm2)) :3.5–4.0 kg/m² プレスL 2-color finish/Main (texture) coat application② (Pattern (texture) layer) (Plastering trowel): 0.2–0.4 kg/m² Sagan finish/Main (texture) coat application① (Base layer) (Plastering trowel/SKK Super Gun (dedicated sprayer) (Universal texture spray gun) Nozzle diameter: 4–6 mm pressure:392–588kPa (4–6kgf/cm2)) :1.0–1.2 kg/m² Sagan finish/Main (texture) coat application② (Pattern (texture) layer) and pattern forming (Plastering trowel): 2.5–3.0 kg/m² サガン2-color finish/Main (texture) coat application① (Base layer) (Plastering trowel/SKK Super Gun (dedicated sprayer) (Universal texture spray gun) Nozzle diameter: 4–6 mm pressure:392–588kPa (4–6kgf/cm2)) :1.0–1.2 kg/m² サガン2-color finish/Main (texture) coat application② (Pattern (texture) layer) and pattern forming (Plastering trowel): 2.5–3.0 kg/m² |
| Recoat Time (drying interval) | 23°C: Main (texture) coat application①→②はbetween steps 2 hours or more (Decorative masking (edge protection) · When decorative joints are provided 16 hours or more) . final curing 24 hours or more |
| Field Notes (JA) | ・ PC部材・ALCパネル・GRC板・各種乾式ボード類など目地を生じる下地では、目地部への施工は割れ発生の恐れがあるため避ける。軽量PC部材への施工は不可。 ・ 下塗りは水性ミラクシーラーエコ（別製品）。主材塗り①（基層塗り）と主材塗り②（模様塗り）の2工程で、所要量は工程ごとの値。骨材（シポサンド・寒水石・Nストーン）を使う仕上げの所要量は骨材を混ぜた状態の量で、ベルアート単体の量ではない。上塗り（SKセラミファイントップ）は必須ではなくオプション。 |
⚠️ Cautions & Notes (Japanese original)
To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of エスケー化研
Page updated: 2026-09-03