エスケー化研
アーキフロアーEH
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | エスケー化研 |
|---|---|
| Use / Type | Use: Floor ｜ Resin: Epoxy Original (JA): 二液溶剤形エポキシ樹脂系塗床材 |
| Water-based / Solvent-based | Solvent-based, 2-component |
| 1K / 2K | 2-component (2K) |
Application Specifications
| Dilution | Roller/brush application (smooth-finish method / coating finish): 5–10% Roller · brush application (NS method/Anti-slip (non-slip)/Top coat): 5–10% Roller · brush application (NS method/Anti-slip (non-slip)/Intermediate coat): 5–10% ▼2 more application methods are collapsed (of 5 total)Collapse againAir spray (conventional spray): No. 6 silica sand 100 NS methodのTotal (Intermediate coat＋Top coat): |
|---|---|
| Thinner / Diluent | EH thinner For thinning|None |
| Number of Coats | Roller/brush application (smooth-finish method / coating finish): 2 coat(s) Roller · brush application (NS method/Anti-slip (non-slip)/Top coat): 2 coat(s) Roller · brush application (NS method/Anti-slip (non-slip)/Intermediate coat): 1 coat(s) ▼2 more application methods are collapsed (of 5 total)Collapse againAir spray (conventional spray): 1 coat(s) NS methodのTotal (Intermediate coat＋Top coat): 3 coat(s) |
| Coverage (consumption) | Roller/brush application (smooth-finish method / coating finish): 0.35 kg/m² (2 coats' worth) Roller · brush application (NS method/Anti-slip (non-slip)/Top coat): 0.40 kg/m² (2 coats' worth) Roller · brush application (NS method/Anti-slip (non-slip)/Intermediate coat): 0.20 kg/m² ▼2 more application methods are collapsed (of 5 total)Collapse againAir spray (conventional spray): 0.30 kg/m² (material: silica sand) NS methodのTotal (Intermediate coat＋Top coat): approx. 0.60 kg/m² (total for the whole method, calculated value: Intermediate coat 0.20＋Top coat 0.40) |
| Recoat Time (drying interval) | 23°C: within the step 8 or more, final curing 24 or more (hours) /耐薬品性発揮には1週間 |
| Mixing Ratio | Base (Comp. A) 4:Hardener (Comp. B) 1 |
| Pot Life | 3 hours (5°C) , 2 hours (23°C) , 1 hours (30°C) |
| Field Notes (JA) | ・ 気温5℃以下・湿度85%RH以上での施工は不可。コンクリート含水率5%以下（高周波静電容量式水分計）を確認し、可使時間を超過した材料は使用禁止。施工後24時間で歩行可能だが、耐薬品性発揮には1週間（23℃）の最終養生が必要。 |
⚠️ Cautions & Notes (Japanese original)
To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of エスケー化研
Page updated: 2026-08-25