エスケー化研
アーキフロアーUT
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | エスケー化研 |
|---|---|
| Use / Type | Use: Floor ｜ Resin: Urethane Original (JA): 二液溶剤形ウレタン樹脂系塗床材 |
| Water-based / Solvent-based | Solvent-based, 2-component |
| 1K / 2K | 2-component (2K) |
Application Specifications
| Dilution | Brush / Roller: 20–40% Air spray (conventional spray): No. 6 silica sand 100 |
|---|---|
| Thinner / Diluent | アーキUシンナーFor thinning|None |
| Number of Coats | Brush / Roller: 2 coat(s) Brush / Roller: 1 coat(s) Air spray (conventional spray): 1 coat(s) |
| Coverage (consumption) | Brush / Roller: 0.35 kg/m²/coat Brush / Roller: 0.18 kg/m²/coat Air spray (conventional spray): 0.25 kg/m²/coat |
| Recoat Time (drying interval) | 23°C: within the step 4–16, final curing 24 or more (hours) |
| Mixing Ratio | Base (Comp. A) 4:Hardener (Comp. B) 1 |
| Pot Life | 3 hours (23°C) |
| Field Notes (JA) | ・ 気温5℃以下・湿度85%RH以上での施工は不可。コンクリート含水率5%以下を確認し、可使時間を超過した材料は使用禁止。施工後24時間で歩行可能だが、耐薬品性発揮には1週間（23℃）の最終養生が必要。 |
⚠️ Cautions & Notes (Japanese original)
To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.
- 公式カタログ: https://www.sk-kaken.co.jp/wp/wp-content/uploads/arkifloor-ut.pdf
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of エスケー化研