アステックペイント

リペアエポCR

Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.

Basic Information

Manufacturerアステックペイント
Use / Type
Use: Exterior Wall | Resin: Epoxy
Original (JA): 二液窯業系サイディング用特殊エポキシ系樹脂補修材(ひび割れ補修材)
Water-based / Solvent-based
1K / 2K1-component (1K)

Application Specifications

DilutionUndiluted (as supplied)
Thinner / Diluent
Number of Coats
Coverage (consumption)
Recoat Time (drying interval)
23°C: between steps 4 hours or more, 7 days or less
Pot Life40 minutes (専用ノズル内混合分のみ) (23°C)
Field Notes (JA)・ 用途=窯業系サイディング専用ひび割れ補修材(専用ガン+専用ノズルで充填・ノズル内で2液混合)
・ 荷姿:2個セット(本体2個・ノズル4本)/6個セット(本体6個・ノズル12本)、1個内容量約63g(50ml)
・ 色:ライトグレー(N-80近似色)
・ 対応素材:窯業系サイディング
・ 使用量目安=ひび割れ幅0.5mm:3.5g/m・1.0mm:10.3g/m・2.0mm:20.0g/m・3.0mm:31.2g/m
・ 硬化時間(工程間)10℃6〜8h/23℃4h/30℃2〜3h/40℃1.5〜2h(各7日以内)
・ 圧縮強さ60.0MPa・硬化収縮率5.0%・ノンブリードタイプ
・ アステックの水性下塗材・溶剤下塗材どちらも塗装可(2023年6月時点)
・ ⚠️最初に出る補修材は混合不十分の場合があり約1cm捨て打ち
・ 可使時間超過時は新しいノズルを使用
・ 一度使用したノズルは硬化するため再使用できない。カートリッジは蓋をすれば再使用できるが、蓋付近で反応した補修材が硬化している場合がある。開封後は早めに使い切る。

⚠️ Cautions & Notes (Japanese original)

To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.

⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
🔍 Search other paints (Japanese)
Data source: official catalogs / technical data sheets (TDS) of アステックペイント