イサム塗料
イサムフロアーGハード
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | イサム塗料 |
|---|---|
| Use / Type | Use: Floor ｜ Resin: Urethane ｜ Features: High-build Original (JA): 無溶剤2液型高硬度ウレタン塗床材（厚膜）／屋内用 |
| Water-based / Solvent-based | Solvent-free, 2-component (100% solids) |
| 1K / 2K | 2-component (2K) |
Application Specifications
| Dilution | Undiluted (as supplied) |
|---|---|
| Thinner / Diluent | — |
| Number of Coats | Trowel application · spatula (scraper) (GH-1 smooth finish): 1 coat(s) Trowel application · spatula (scraper) (GH-2 Anti-slip (non-slip)): 2 coat(s) Trowel application · spatula (scraper) (GH-3 膨れ防止平滑仕上げ): 1 coat(s) |
| Coverage (consumption) | Trowel application · spatula (scraper) (GH-1 smooth finish): 1.8 kg/m² (Top coat 1 step) Trowel application · spatula (scraper) (GH-2 Anti-slip (non-slip)): 1.5 kg/m² (Intermediate coat 0.90＋Top coat 0.60のTotal. 別にNo. 5 silica sandを散布し8–24時間後に回収) Trowel application · spatula (scraper) (GH-3 膨れ防止平滑仕上げ): 1.8 kg/m² (Top coat 1 step. Substrate (base surface)にエポロR Primerを2回入れる点がGH-1と違う) |
| Mixing Ratio | Base (Comp. A) 5:Hardener (Comp. B) 1 |
| Pot Life | 20 minutes (25°C) |
| Field Notes (JA) | ・ 荷姿18kgセット（A液15kg・B液3kg）。標準塗り10㎡/セット（1回塗り）。GH-1工法（平滑）：下塗りエポロRプライマー（A:B:粉体=1:1:2、清水5〜7%希釈、0.40〜0.60、24〜72時間）→目止めエポロKプライマー（A:B=15:3、無希釈、0.30、12〜48時間、建材ヨウ変剤をKプライマーに対し3〜5%添加）→上塗りGハード（無希釈、1.8、最終養生24時間以上）。GH-2（防滑）：中塗り0.90→骨材硅砂5号2.0→上塗り0.60。GH-3（膨れ防止平滑）。屋内用（屋外・紫外線当たる箇所は非推奨）。消防法A液B液とも第3石油類、有機則・特化則非該当、F☆☆☆☆。材工GH-1:9,800円/㎡（300㎡以上）。清水希釈は下塗りエポロRプライマーのみ（本材は無溶剤・無希釈）。 ・ 硅砂の散布量: GH-2 硅砂5号 2.0kg/㎡。 ・ 工法で必要量が変わります。公式カタログ(2024.04)の工法別の値です。なお製品ページは「1.8kg／㎡（2回塗り）」、カタログは「上塗り1工程1.8＋荷姿10㎡(1回塗り)」で食い違っており、公式内でどちらが正か決められません。 |
⚠️ Cautions & Notes (Japanese original)
To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of イサム塗料
Page updated: 2026-09-03