イサム塗料

エポロフロアーEM

Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.

Basic Information

Manufacturer	イサム塗料
Use / Type	Resin: Epoxy Original (JA): 無溶剤2液型エポキシ樹脂モルタル／屋内用
Water-based / Solvent-based	Solvent-free, 2-component (100% solids)
1K / 2K	2-component (2K)

Application Specifications

Dilution	Undiluted (as supplied)
Thinner / Diluent	—
Number of Coats	1 coat(s)
Coverage (consumption)	6 kg/m² (EM-3 method: EM0.75＋silica sand 5号2.625＋silica sand 7号2.625)
Mixing Ratio	Base (Comp. A):Hardener (Comp. B):珪砂=20:8:196
Pot Life	—
Field Notes (JA)	・エポキシ樹脂モルタル。荷姿28kgセット（A液20kg・B液8kg）＋硅砂別途。標準塗り26㎡/セット（タックコート＋エポキシモルタル）。EM-3工法：下塗りエポロEプライマー（A:B=1:1、Eシンナー0～30%、5～72時間）→タックコート（EM A:B=5:2、無希釈、0.30、直ちに）→エポキシモルタル（EM0.75＋硅砂5号2.625＋硅砂7号2.625＝計6.0kg/㎡、最終養生24時間以上）。EM-5工法：モルタルEM1.25＋硅砂5号4.375＋硅砂7号4.375。EM-6工法：モルタルEM1.0＋硅砂各3.5→目止めETコテ用0.30（建材ヨウ変剤3～5%添加）→上塗りETコテ用1.0。屋内用（屋外・紫外線当たる箇所は非推奨）。F☆☆☆☆。材工EM-3:6,800円/㎡（300㎡以上）。可使時間・塗り重ね時間・塗り回数の明記なし（モルタルのコテ塗り、タックコートは直ちに、モルタル最終養生24h）。・樹脂モルタル。配合主剤:硬化剤:珪砂=20:8:196(樹脂A:B=5:2に珪砂を加える)。

⚠️ Cautions & Notes (Japanese original)

To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.

公式製品説明書: https://www.isamu.co.jp/wp-content/uploads/2018/05/エポロフロアーEM_202404.pdf

⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.

🔍 Search other paints (Japanese)

Data source: official catalogs / technical data sheets (TDS) of イサム塗料