関西ペイント
KCエポエラストH中塗
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | 関西ペイント |
|---|---|
| Use / Type | Resin: Epoxy Original (JA): 変性ポリアミン硬化エポキシ樹脂中塗塗料(2液形) |
| Water-based / Solvent-based | Solvent-based, 2-component |
| 1K / 2K | 2-component (2K) |
Application Specifications
| Dilution | airless: 0–20% Brush / Roller: 0–10% |
|---|---|
| Thinner / Diluent | テクトEP thinner |
| Number of Coats | 1 coat(s) |
| Coverage (consumption) | airless: 320 g/m² Brush / Roller: 260 g/m² |
| Recoat Time (drying interval) | 5°C: Min 48 hours / Max 10 days Usable time 8 hours 10°C: Min 36 hours / Max 10 days Usable time 7 hours 20°C: Min 24 hours / Max 10 days Usable time 6 hours 30°C: Min 24 hours / Max 10 days Usable time 4 hours 40°C: Min 24 hours / Max 10 days Usable time 4 hours |
| Mixing Ratio | Base 8:Hardener (Comp. B) 1 |
| Pot Life | 8 hours (5°C) , 7 hours (10°C) , 6 hours (20°C) , 4 hours (30°C) , 4 hours (40°C) |
| Induction time (after mixing) | Not required (explicitly stated in the official data sheet) |
| Field Notes (JA) | ・ 標準膜厚は下塗100µm・上塗60µm（Dry） ・ 塗装は温度5℃以上・湿度85%以下で行う。 ・ 低温時は乾燥性が著しく低下するため5℃以下の気温が連続する場合は施工しない。 |
* For heavy-duty anticorrosion work, the number of coats and the film thickness are fixed by the painting specification of each project. The figures shown here are the maker's standard values.
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of 関西ペイント
Page updated: 2026-09-03