関西ペイント
KCエポプライマー
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | 関西ペイント |
|---|---|
| Use / Type | Resin: Epoxy Original (JA): アミンアダクト硬化エポキシ樹脂塗料( 2 液形) |
| Water-based / Solvent-based | Solvent-based, 2-component |
| 1K / 2K | 2-component (2K) |
Application Specifications
| Dilution | 10–20% |
|---|---|
| Thinner / Diluent | テクトEP thinner |
| Number of Coats | — |
| Coverage (consumption) | 100 g/m² |
| Recoat Time (drying interval) | 5°C: Min 48 hours / Max 10 days Usable time 8 hours 10°C: Min 36 hours / Max 10 days Usable time 8 hours 20°C: Min 24 hours / Max 10 days Usable time 8 hours 30°C: Min 16 hours / Max 10 days Usable time 5 hours 40°C: Min 12 hours / Max 10 days Usable time 5 hours |
| Mixing Ratio | Base:Hardener (Comp. B)=4:1 |
| Pot Life | 8 hours (5°C) , 8 hours (10°C) , 8 hours (20°C) , 5 hours (30°C) , 5 hours (40°C) |
| Induction time (after mixing) | Not required (explicitly stated in the official data sheet) |
| Field Notes (JA) | ・ アミンアダクト硬化エポキシ樹脂塗料(2液形)コンクリート用下塗。ベース:硬化剤=4:1(重量比) ・ コンクリート素地は水分10%以下・pH10以下に調整する。 ・ シンナー希釈率は素地の状態に応じて調整する。 ・ 低温時は乾燥性が著しく低下し塗膜欠陥のおそれがあるため5℃以下の気温が連続する場合は施工しない。 |
* For heavy-duty anticorrosion work, the number of coats and the film thickness are fixed by the painting specification of each project. The figures shown here are the maker's standard values.
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of 関西ペイント
Page updated: 2026-09-03