菊水化学工業
ガイナマルチシーラー
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | 菊水化学工業 |
|---|---|
| Use / Type | Use: Primer / Undercoat ｜ Resin: Epoxy Original (JA): 弱溶剤形2液エポキシ樹脂系浸透性シーラー |
| Water-based / Solvent-based | Mild solvent-based, 2-component |
| 1K / 2K | 2-component (2K) |
Application Specifications
| Dilution | Undiluted (as supplied) |
|---|---|
| Thinner / Diluent | — |
| Number of Coats | 1–2 |
| Coverage (consumption) | airless: 45–150 m²/15 kg set (kit) (0.10–0.34 kg/m²) airless: 25–100 m²/15 kg set (kit) (0.15–0.60 kg/m², Maximum 0.60 kg/m²/2 coat(s)) airless: 50–100 m²/15 kg set (kit) (0.15–0.30 kg/m²) |
| Recoat Time (drying interval) | 23°C: 3 hours or more–7 days or less |
| Mixing Ratio | Main (texture) material 5:Hardener (Comp. B) 1 |
| Pot Life | 6 hours (23°C) |
| Field Notes (JA) | ・ 無希釈。希釈剤要確認（本文に希釈剤名・希釈率の記載なし） ・ 2液形。主材と硬化剤を指定割合で混合し、可使時間6時間（23℃）内に使い切る。気温5℃以下・湿度85％以上・結露のおそれがある時、降雨降雪強風時は施工不可。塗替えは高圧水洗後に夏季2日以上・冬季3日以上乾燥させ、コンクリート・モルタル下地は含水率10％以下・pH10以下で施工する。 |
⚠️ Cautions & Notes (Japanese original)
To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.
- 公式施工要領書: https://www.kikusui-chem.co.jp/products/p125.html
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of 菊水化学工業