菊水化学工業
キクスイフィラー
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | 菊水化学工業 |
|---|---|
| Use / Type | Original (JA): セメント系下地調整塗材 1種（下地調整塗材 C－1） |
| Water-based / Solvent-based | Water-based, 2-component |
| 1K / 2K | 2-component (2K) |
Application Specifications
| Dilution | Main material 20 kg + liquid admixture 10 kg + clean water 0–8 L (liquid-admixture type · mix ratio) |
|---|---|
| Thinner / Diluent | Tap water |
| Number of Coats | 1 |
| Coverage (consumption) | 30–50 m²/set (kit) (0.6–1.0 kg/m²) |
| Recoat Time (drying interval) | 23°C: 24 hours or more |
| Mixing Ratio | Main (texture) material 2:Liquid admixture 1 |
| Pot Life | 1 hours or less (20°C) |
| Field Notes (JA) | ・ 主材20kg、混和液10kg、清水0～8L。標準塗厚約1㎜、単位容積質量約1.5kg/L。塗回数1回。溶剤製品を次工程に施工する場合は72時間(20℃)以上の乾燥養生。 ・ 練り混ぜ後の可使時間は1時間以内(20℃)で、時間超過品の練り直し・再使用や、水を加えての練り戻しは不可。練り水・希釈水は必ず清水を使用し、空練り後ダマが残らないよう十分練り混ぜる。素地は含水率10%以下・pH10以下とし、気温5℃以下・湿度85%以上または結露のおそれ時は施工しない。 |
⚠️ Cautions & Notes (Japanese original)
To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.
- 公式施工要領書: https://www.kikusui-chem.co.jp/products/p152.html
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of 菊水化学工業