水谷ペイント
ボウジンテックスタフタイトU
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | 水谷ペイント |
|---|---|
| Use / Type | Resin: Urethane ｜ Features: High-build Original (JA): 厚膜2液型ポリウレタン樹脂塗料 |
| Water-based / Solvent-based | Solvent-based, 2-component |
| 1K / 2K | 2-component (2K) |
Application Specifications
| Dilution | Not published by the manufacturer (check the can label or official TDS) |
|---|---|
| Thinner / Diluent | — |
| Number of Coats | 1 |
| Coverage (consumption) | Steel trowel (self-leveling method; base coat undercoat, containing No. 7 silica sand): 0.5–0.6 kg/m²/coat Base coat undercoat (paste method, containing No. 6 silica sand): 2.0 kg/m²/coat Steel trowel (base coat topcoat): 1.4–1.5 kg/m²/coat Anti-slip (non-slip): 0.5 kg/m²/coat |
| Recoat Time (drying interval) | 23°C: 12 h or more, 24 h or less (base coat, undercoat→Top coat. 防滑時のTop coat→Anti-slip (non-slip)も同) , walkable 16 h or more, full cure 7 days or more |
| Mixing Ratio | Base (Comp. A):Hardener (Comp. B)=14:4 |
| Pot Life | 35 minutes (10°C) , 20 minutes (23°C) , 15 minutes (30°C) |
| Field Notes (JA) | ・ 下塗り: ボウジンテックス強化シーラー（1回目はフィラー入り＋下塗り2回目あり・別製品。吸い込みがはげしい場合はフィラーなしで再度塗装）。塗装仕様表に希釈率欄が存在せず希釈率の規定記載なし。専用希釈剤としてボウジンテックスタフタイトＵ専用希釈剤（4L・1L）の荷姿記載あり（使用工程の規定なし）。規定塗付量以下では膨れの恐れ、最終上塗りは1回で1.4〜1.5kg/㎡塗付を厳守。水分と敏感に反応し発泡するため乾燥養生期間（夏季30日以上・冬季40日以上）厳守・湿度80%以下・気温5〜30℃で施工。防滑仕上げは上塗りと同時に5〜6号硅砂0.3〜0.4kg/㎡を均一に散布し直後にローラー。冬季施工用の硬化促進剤あり。熱水がかかる床面には不適。本値は流しのべ工法・平滑仕上げ（膜厚約1.5mm）代表。 ・ 配合比(下塗り材・別製品): 下塗り(強化シーラー)：16kg・4kg |
⚠️ Cautions & Notes (Japanese original)
To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of 水谷ペイント
Page updated: 2026-08-26