水谷ペイント
水系ボウジンテックス#300
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | 水谷ペイント |
|---|---|
| Use / Type | Resin: Acrylic Original (JA): 水系1液型アクリル樹脂塗料 |
| Water-based / Solvent-based | Water-based, 1-component |
| 1K / 2K | 2-component (2K) |
Application Specifications
| Dilution | texture spray gun, roller (topcoat #300T, mortar/concrete surface): 5–15% notched squeegee · ローラー併用 (Intermediate coat#300N · fine-textured asphalt surface): 1–3% Notched squeegee (intermediate coat 1, #300N, rough asphalt surface): 1–3% ▼2 more application methods are collapsed (of 5 total)Collapse againNotched squeegee and roller combined (intermediate coat 2, #300N, rough asphalt surface): 1–3% texture spray gun, roller (topcoat #300T, fine and rough asphalt surface): 5–15% |
|---|---|
| Thinner / Diluent | dilution water |
| Number of Coats | texture spray gun, roller (topcoat #300T, mortar/concrete surface): 2 coat(s) notched squeegee · ローラー併用 (Intermediate coat#300N · fine-textured asphalt surface): 1 coat(s) Notched squeegee (intermediate coat 1, #300N, rough asphalt surface): 1 coat(s) ▼2 more application methods are collapsed (of 5 total)Collapse againNotched squeegee and roller combined (intermediate coat 2, #300N, rough asphalt surface): 1 coat(s) texture spray gun, roller (topcoat #300T, fine and rough asphalt surface): 1 coat(s) |
| Coverage (consumption) | texture spray gun, roller (topcoat #300T, mortar/concrete surface): 0.30–0.40 kg/m²/coat notched squeegee · ローラー併用 (Intermediate coat#300N · fine-textured asphalt surface): 0.60–1.00 kg/m²/coat Notched squeegee (intermediate coat 1, #300N, rough asphalt surface): 0.60–1.20 kg/m²/coat ▼2 more application methods are collapsed (of 5 total)Collapse againNotched squeegee and roller combined (intermediate coat 2, #300N, rough asphalt surface): 0.40–0.60 kg/m²/coat texture spray gun, roller (topcoat #300T, fine and rough asphalt surface): 0.30–0.40 kg/m²/coat |
| Recoat Time (drying interval) | 23°C: Primer (undercoat)→Top coat (mortar/concrete · Epoxy sealerⅡ): 4 h or more, 48 h or less/Within the top-coat process (mortar/concrete · Epoxy sealerⅡ): 2 h or more/walkable (mortar/concrete · Epoxy sealerⅡ): 16 h or more (full cure 2 days or more) /Primer (undercoat)→Top coat (mortar/concrete · reinforcing sealer): 5 h or more, 24 h or less/Within the top-coat process (mortar/concrete · reinforcing sealer): 2 h or more/walkable (mortar/concrete · reinforcing sealer): 16 h or more (full cure 2 days or more) /Primer (undercoat)→Intermediate coat (fine-textured asphalt surface): 2 h or more/Intermediate coat→Top coat (fine-textured asphalt surface): 2 h or more/walkable (fine-textured asphalt surface): 16 h or more (full cure 2 days or more) /Primer (undercoat)→Intermediate coat-1(Rough-surfaced asphalt): 2 h or more/Intermediate coat-1→Intermediate coat-2(Rough-surfaced asphalt): 2 h or more/Intermediate coat-2→Top coat (Rough-surfaced asphalt): 2 h or more/walkable (Rough-surfaced asphalt): 16 h or more (full cure 2 days or more) |
| Mixing Ratio | Top coat (#300T): 20 kg. Intermediate coat (#300N): 20 kg |
| Pot Life | Not listed in official data |
| Field Notes (JA) | ・ 下塗り: モルタルコンクリート=水系ボウジンテックスエポキシシーラーⅡ（無希釈）または溶剤系可の場合ボウジンテックス強化シーラー（0〜10%・＃5000Uシンナー）、アスファルト=水系ボウジンテックスシーラー（無希釈）（いずれも別製品）。アスファルト粗面は中塗りを2回塗装（中塗り-1→中塗り-2）。施工気温10℃以下は乾燥不良のため避ける。塗付量に希釈水は含まれない。 ・ 配合比(下塗り材・別製品): 下塗り(エポキシシーラーⅡ)：14kgセット(主剤7kg／硬化剤7kg)。下塗り(シーラー・1液型)：15kg |
⚠️ Cautions & Notes (Japanese original)
To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of 水谷ペイント
Page updated: 2026-09-03