日本ペイント
ビラカットクリーン
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | 日本ペイント |
|---|---|
| Use / Type | Resin: Fluoropolymer Original (JA): 特殊シリコンフッ素変性樹脂系クリヤー塗料 |
| Water-based / Solvent-based | Solvent-based, 2-component |
| 1K / 2K | 2-component (2K) |
Application Specifications
| Dilution | 0–5% |
|---|---|
| Thinner / Diluent | ハイポンウレタンシンナー / ハイポンウレタンシンナーS |
| Number of Coats | 1 coat(s) |
| Coverage (consumption) | 0.07 kg/m²/coat |
| Mixing Ratio | Base (Comp. A) 6:Hardener (Comp. B) 1 |
| Pot Life | 2 hours (20°C) |
⚠️ Cautions & Notes (Japanese original)
To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.
- 落書き除去性◎（ローラー塗装可）
- ハイポン50ファインやデュフロン100ファイン等の上塗り塗膜（専用骨材を混ぜて塗装した塗膜）の上に塗装することで貼紙防止機能を発揮
- 硬化剤は湿気で変質→密栓貯蔵
- ポットライフが短い→塗付量・塗装面積・所要時間を把握してから混合開始
- 湿度に敏感: 鋼板温度が露点温度より3℃以内の場合は塗装NG（塗装時・塗膜乾燥過程ともに留意）
- 塗装器具は終了後ただちに希釈用シンナーで洗浄
- 硬化剤皮膚付着時は水/せっけん水で速やかに洗浄
- 公式施工要領書: https://s3b-prd-nptuweb-01.s3.ap-northeast-1.amazonaws.com/product/document/document_file/_3-040RQA-00-01.pdf
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of 日本ペイント