日本ペイント
インディアートCERA
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | 日本ペイント |
|---|---|
| Use / Type | Use: Exterior Wall Original (JA): 外装仕上げ材（意匠） |
| Water-based / Solvent-based | Water-based, 1-component |
| 1K / 2K | 2-component (2K) |
Application Specifications
| Dilution | Air spray (conventional spray): 5–10% Brush / Roller: 0–10% pattern application (Juraku texture gun): 15–20% ▼2 more application methods are collapsed (of 5 total)Collapse again模様塗り砂骨ローラー＋relief (embossed-pattern) roller: 0–3% pattern application with square trowel: 0–3% |
|---|---|
| Thinner / Diluent | Tap water |
| Number of Coats | Air spray (conventional spray): 1 coat(s) Brush / Roller: 1 coat(s) pattern application (Juraku texture gun): 1st application ▼2 more application methods are collapsed (of 5 total)Collapse again模様塗り砂骨ローラー＋relief (embossed-pattern) roller: 1st application pattern application with square trowel: 1st application |
| Coverage (consumption) | Air spray (conventional spray): 0.8–1.0 kg/m²/coat Brush / Roller: 0.6–1.0 kg/m²/coat pattern application (Juraku texture gun): 1.0–1.2 kg/m²/coat ▼2 more application methods are collapsed (of 5 total)Collapse again模様塗り砂骨ローラー＋relief (embossed-pattern) roller: 2.0–3.0 kg/m²/coat pattern application with square trowel: 1.5–2.0 kg/m²/coat |
| Recoat Time (drying interval) | 5–10°C: 8 hours or more 23°C: 3 hours or more 30°C: 2 hours or more |
| Mixing Ratio | Juraku texture gun: インディアートCERA100: marble chips 1 rin (marble-chip grain-size grade) 50 / Texture roller (mastic roller)＋relief (embossed-pattern) roller: インディアートCERA100: marble chips 1 rin (marble-chip grain-size grade) 20 |
| Pot Life | Not listed in official data |
| Field Notes (JA) | ・ 水性反応硬化形の意匠仕上げ材。微弾性でヘヤクラックに追従し防藻防かび性を有する。寒水石（骨材）を重量比で混合して塗装する（ジュラク風はCERA100:寒水石50等）。気温5℃未満・湿度85%以上・結露時は塗装不可。内装用の国土交通省認定防火材料も設定あり。 ・ 基層塗りの例外: ライン－7は砂骨ローラー（細目）で希釈率12〜15%、フラット－6は基層塗りの工程が不要（公式カタログp9の注記） |
⚠️ Cautions & Notes (Japanese original)
To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of 日本ペイント
Page updated: 2026-09-03