エスケー化研
ニュートップレスクリーンタイル
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | エスケー化研 |
|---|---|
| Use / Type | Use: Exterior Wall ｜ Features: Elastomeric, Waterproof Original (JA): 防水形外装薄塗材E（多機能型単層弾性塗材・タイル状仕上げ） |
| Water-based / Solvent-based | Water-based, 1-component |
| 1K / 2K | 1-component (1K) |
Application Specifications
| Dilution | Main (texture) coat application (1) Base layer (As-sprayed (spray texture) finish · raised-part treatment finish/new construction): 5–8% Main (texture) coat application (2) Pattern (texture) layer (As-sprayed (spray texture) finish · raised-part treatment finish/new construction): 0–3% Knockdown (high-spot flattening) (common to new construction and renovation / for pressing down): ▼4 more application methods are collapsed (of 7 total)Collapse againBase material application (1), base coat (renovation method): 5–8% Base material application (2), texture coat (renovation method): 0–3% Main (texture) coat application (2) Pattern (texture) layer (Fine-texture finish/new construction) (tile-gun nozzle diameter 4–6.5 mm): 0–3% Main (texture) coat application (2) Pattern (texture) layer (Fine-texture finish/renovation method) (tile-gun nozzle diameter 4–6.5 mm): 0–3% |
|---|---|
| Thinner / Diluent | Tap water For thinning|塗料用シンナーA (paint thinner A) (凸部押さえ用途, thinningではない) |
| Number of Coats | Main (texture) coat application (1) Base layer (As-sprayed (spray texture) finish · raised-part treatment finish/new construction): 1–2 Main (texture) coat application (2) Pattern (texture) layer (As-sprayed (spray texture) finish · raised-part treatment finish/new construction): 1 Knockdown (high-spot flattening) (common to new construction and renovation / for pressing down): － ▼4 more application methods are collapsed (of 7 total)Collapse againBase material application (1), base coat (renovation method): 1–2 Base material application (2), texture coat (renovation method): 1 Main (texture) coat application (2) Pattern (texture) layer (Fine-texture finish/new construction) (tile-gun nozzle diameter 4–6.5 mm): 1 Main (texture) coat application (2) Pattern (texture) layer (Fine-texture finish/renovation method) (tile-gun nozzle diameter 4–6.5 mm): 1 |
| Coverage (consumption) | Main (texture) coat application (1) Base layer (As-sprayed (spray texture) finish · raised-part treatment finish/new construction): 0.7–1.2 kg/m² (1–2 coats in total) Main (texture) coat application (2) Pattern (texture) layer (As-sprayed (spray texture) finish · raised-part treatment finish/new construction): 0.6–1.0 kg/m² Knockdown (high-spot flattening) (common to new construction and renovation / for pressing down): ▼4 more application methods are collapsed (of 7 total)Collapse againBase material application (1), base coat (renovation method): 0.7–1.2 kg/m² (1–2 coats in total) Base material application (2), texture coat (renovation method): 0.6–1.0 kg/m² Main (texture) coat application (2) Pattern (texture) layer (Fine-texture finish/new construction) (tile-gun nozzle diameter 4–6.5 mm): 0.3–0.5 kg/m² Main (texture) coat application (2) Pattern (texture) layer (Fine-texture finish/renovation method) (tile-gun nozzle diameter 4–6.5 mm): 0.3–0.5 kg/m² |
| Recoat Time (drying interval) | 23°C: Pattern (texture) layerの『As-sprayed (spray texture) finish 24 hours or more』は最終養生欄, 工程内欄は『Knockdown (flattening high spots) 0.5 hours or less』の注記 (new construction · renovationとも) . 他の値 (between undercoat steps 2 or more/renovation 3 or more · base layer within the step 2以上工程間2 or more · 改修下塗り工程内3以上工程間3 or more · Knockdown (flattening high spots) final curing 24 or more) は一致 |
| Field Notes (JA) | ・ 上塗り不要の多機能型単層弾性塗材。下塗りは指定材料を必ず使用（新築:水性ミラクシーラーエコ、改修:水性ソフトサーフSG）。下地は含水率10%以下・pH10以下とする。 ・ 【訂正記録】2026-08-08 厳格照合ラウンド2（文脈付き全数再検査）で訂正。凸部処理行の「塗布量0.5以内」は公式資料では所要量欄が「—」で、0.5以内は模様塗り→凸部処理の工程間隔(0.5時間以内)の値だった（欄違い）。凸部処理はプラスチックローラーに塗料用シンナーAを付けて模様塗り後0.5時間以内に凸部を押さえる。 |
⚠️ Cautions & Notes (Japanese original)
To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of エスケー化研
Page updated: 2026-08-25