エスケー化研
SK#8000プライマー
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | エスケー化研 |
|---|---|
| Use / Type | Use: Primer / Undercoat Original (JA): JIS K 5552 ジンクリッチプライマー2種（有機ジンクリッチプライマー） |
| Water-based / Solvent-based | Solvent-based, 2-component |
| 1K / 2K | 2-component (2K) |
Application Specifications
| Dilution | Brush / Roller: 100–125% (relative to Base) / 16–20% (relative to total of Base · Hardener · zinc powder) airless: 125–150% (relative to Base) / 20–24% (relative to total of Base · Hardener · zinc powder) |
|---|---|
| Thinner / Diluent | SK#8000プライマーシンナーFor thinning |
| Number of Coats | 1 coat(s) |
| Coverage (consumption) | 0.20–0.23 kg/m²/coat |
| Recoat Time (drying interval) | 23°C: between steps 16 or more, 6 months or less (hours) |
| Mixing Ratio | Base (Comp. A):Hardener (Comp. B):Zinc dust=16:4:80 |
| Pot Life | 5 hours (23°C) |
| Field Notes (JA) | ・ 主剤に硬化剤を加えて撹拌しながら亜鉛末を少量ずつ加え、シンナー添加後80〜100メッシュのふるいでろ過して使用する。亜鉛末が沈降するため塗装中も撹拌を続ける。気温5℃以下・湿度85%以上での施工は原則不可。 |
⚠️ Cautions & Notes (Japanese original)
To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.
- 公式カタログ: https://www.sk-kaken.co.jp/wp/wp-content/uploads/8000primer.pdf
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of エスケー化研