エスケー化研
アーキフロアーAW
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | エスケー化研 |
|---|---|
| Use / Type | Use: Floor ｜ Resin: Acrylic Original (JA): 一液水性アクリル樹脂系塗床材（艶消し） |
| Water-based / Solvent-based | Water-based, 1-component |
| 1K / 2K | 1-component (1K) |
Application Specifications
| Dilution | Roller/brush application (smooth-finish method, new construction): 0–20% Trowel / notched squeegee application (NS method Main (texture) material 1st application): 5–10% Trowel / notched squeegee application (NS method Main (texture) material 2nd application): 5–10% ▼2 more application methods are collapsed (of 5 total)Collapse againRoller/brush application (asphalt surface): 10–20% NS methodのTotal (Main (texture) material 1st application＋2nd application): |
|---|---|
| Thinner / Diluent | Tap water For thinning |
| Number of Coats | Roller/brush application (smooth-finish method, new construction): 2 coat(s) Trowel / notched squeegee application (NS method Main (texture) material 1st application): 1 coat(s) Trowel / notched squeegee application (NS method Main (texture) material 2nd application): 1 coat(s) ▼2 more application methods are collapsed (of 5 total)Collapse againRoller/brush application (asphalt surface): 2 coat(s) NS methodのTotal (Main (texture) material 1st application＋2nd application): 2 coat(s) |
| Coverage (consumption) | Roller/brush application (smooth-finish method, new construction): 0.30 kg/m² (2 coats' worth) Trowel / notched squeegee application (NS method Main (texture) material 1st application): 0.40 kg/m² (No. 7 silica sand 20 amount as the mixed material. the paint itself is about 0.33 kg/m²＝official mixing ratio Main (texture) material 100:silica sand 20 calculated from) Trowel / notched squeegee application (NS method Main (texture) material 2nd application): 0.60 kg/m² (No. 7 silica sand 120 amount as the mixed material. the paint itself is about 0.27 kg/m²＝official mixing ratio Main (texture) material 100:silica sand 120 calculated from) ▼2 more application methods are collapsed (of 5 total)Collapse againRoller/brush application (asphalt surface): 1.0–1.4 kg/m² (total of 2 coats) NS methodのTotal (Main (texture) material 1st application＋2nd application): approx. 0.60 kg/m² (total for the whole method, calculated value: 塗料分 Main (texture) material 1st application 0.33＋2nd application 0.27. silica sandは別材料) |
| Recoat Time (drying interval) | 23°C: smooth-finish method within the step 3 or more · final curing 24 or more, NS method between steps 3 or more · final curing 24 or more (hours) |
| Field Notes (JA) | ・ アスファルト面は密粒アスファルト以外には塗装不可。施工後24時間で歩行可能だが、十分な耐久性・耐薬品性の発揮には1週間（23℃）の最終養生が必要。凍結防止のため3℃以上の室内で保管する。 |
⚠️ Cautions & Notes (Japanese original)
To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of エスケー化研
Page updated: 2026-08-25