日本ペイント
ジキトーンカフェ
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | 日本ペイント |
|---|---|
| Use / Type | Use: Exterior Wall Original (JA): 外装仕上げ材（意匠） |
| Water-based / Solvent-based | Water-based, 1-component |
| 1K / 2K | 1-component (1K) |
Application Specifications
| Dilution | Spray application · smooth/目地なし仕上げ (Universal texture spray gun, texture spray gun, Texture hopper gun (tile gun) Nozzle diameterφ6–8 mm): 2–5% Spray application · smooth/目地仕上げ (Universal texture spray gun, texture spray gun Nozzle diameterφ8–10 mm): 2–5% Spray application · textured/Cast (head knockdown) pattern (texture) (Universal texture spray gun, texture spray gun, tile-gun nozzle diameterφ6–8 mm) (1st coat): 2–5% Spray application · textured/Cast (head knockdown) pattern (texture) (Universal texture spray gun, texture spray gun, tile-gun nozzle diameterφ8–10 mm) (2nd coat): 1–3% |
|---|---|
| Thinner / Diluent | Tap water |
| Number of Coats | 1 coat(s) |
| Coverage (consumption) | Spray application · smooth/目地なし仕上げ (Universal texture spray gun, texture spray gun, Texture hopper gun (tile gun) Nozzle diameterφ6–8 mm): 1.6–1.8 kg/m²/coat Spray application · smooth/目地仕上げ (Universal texture spray gun, texture spray gun Nozzle diameterφ8–10 mm): 1.6–1.8 kg/m²/coat Spray application · textured/Cast (head knockdown) pattern (texture) (Universal texture spray gun, texture spray gun, tile-gun nozzle diameterφ6–8 mm) (1st coat): 1.4–1.6 kg/m²/coat Spray application · textured/Cast (head knockdown) pattern (texture) (Universal texture spray gun, texture spray gun, tile-gun nozzle diameterφ8–10 mm) (2nd coat): 1.0–1.2 kg/m²/coat |
| Recoat Time (drying interval) | [Recoat drying time 1 coat] 5–10°C: 24 hours or more [Recoat drying time 1 coat] 23°C: 16 hours or more [Recoat drying time 1 coat] 30°C: 16 hours or more [Recoat drying time 2 coats] 5–10°C: 24 hours or more [Recoat drying time 2 coats] 23°C: 16 hours or more [Recoat drying time 2 coats] 30°C: 16 hours or more |
| Field Notes (JA) | ・ 【目地仕上げの工程】下塗り（目地着色）ニッペアンダーフィラーS（目地用）0.60〜1.00kg/㎡×1回（吹付け 万能ガン・リシンガン φ4〜6mm 希釈3〜8%／ローラー 希釈0〜2%・16時間以上）→墨出し→目地テープ貼り→中塗り ジキトーンカフェ→塗装後直ちに目地外し→上塗り ニッペジキトーンUクリヤー0.10〜0.16kg/㎡×2回（ニッペ建築ウレタン用シンナー はけ・ローラー40〜60%／エアレス・エアスプレー50〜80%・2時間以上）。アンダーフィラーS（目地用）は必ず全面に塗る。淡彩色は少し暗めに仕上がるため塗り板での確認を推奨。 |
⚠️ Cautions & Notes (Japanese original)
To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of 日本ペイント
Page updated: 2026-09-03